Re: [PATCH v3 7/7] dt-bindings: drm/bridge: Update bindings for ADV7533

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On 04/22/2016 04:02 AM, Laurent Pinchart wrote:
Hi Archit,

Thank you for the patch.

On Wednesday 09 Mar 2016 16:27:18 Archit Taneja wrote:
Add description of ADV7533. Add the required and optional properties that
are specific to it.

Cc: devicetree@xxxxxxxxxxxxxxx
Cc: Rob Herring <robh@xxxxxxxxxx>

Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
  .../bindings/display/bridge/adi,adv7511.txt        | 25 ++++++++++++++-----
  1 file changed, 20 insertions(+), 5 deletions(-)

diff --git
a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index
96c25ee..420da5a 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -1,13 +1,19 @@
-Analog Device ADV7511(W)/13 HDMI Encoders
+Analog Device ADV7511(W)/13/33 HDMI Encoders
  -----------------------------------------

-The ADV7511, ADV7511W and ADV7513 are HDMI audio and video transmitters
+The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video
transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space
conversion, -S/PDIF, CEC and HDCP.
+S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels,
while +the others support RGB interface.

  Required properties:

-- compatible: Should be one of "adi,adv7511", "adi,adv7511w" or
"adi,adv7513" +- compatible: Should be one of:
+		"adi,adv7511"
+		"adi,adv7511w"
+		"adi,adv7513"
+		"adi,adv7533"
+
  - reg: I2C slave address

  The ADV7511 supports a large number of input data formats that differ by
their @@ -32,6 +38,11 @@ The following input format properties are required
except in "rgb 1x" and - adi,input-justification: The input bit
justification ("left", "evenly", "right").

+The following properties are required for ADV7533:
+
+- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It
should +  be one of 1, 2, 3 or 4.

Does the ADV7533 support data lanes remapping ?

It doesn't support remapping of lanes. There is only one register field
that allows us to select the number of lanes.


  Optional properties:

  - interrupts: Specifier for the ADV7511 interrupt
@@ -42,13 +53,17 @@ Optional properties:
  - adi,embedded-sync: The input uses synchronization signals embedded in the
data stream (similar to BT.656). Defaults to separate H/V synchronization
signals.
+- adi,disable-timing-generator: Only for ADV7533. Disables the internal
timing +  generator. The chip will rely on the sync signals in the DSI data
lanes, +  rather than generate its own timings for HDMI output.

Isn't that something that should be selectable at runtime ?

The timing generator can be enabled/disabled at runtime. Although, we
don't have a way to tell the driver whether we want to keep it enabled
or not.

It's a hardware feature that works well on most platforms, but not on
all. In particular, it works well on DB410c, but causes issues with
the Hikey 96 board. The DSI host on Hikey has different clock sources that generate the display controller's pixel clock and DSI byte clock,
whereas the Qualcomm SoC uses the same source. My guess is that the
ADV7533's timing generator doesn't like it when the pixel data and
clock are out of phase or something.

Since it is a hardware feature which needs tweaking, I thought it
qualified as a DT property.


  Required nodes:

  The ADV7511 has two video ports. Their connections are modelled using the
OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.

-- Video port 0 for the RGB or YUV input
+- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the
+  remote endpoint phandle should refer to a valid mipi_dsi_host device

Nitpicking, I would write "reference" instead of "refer to".

I'll fix this in the next revision.

Thanks,
Archit

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux