On Wed, Apr 20, 2016 at 03:02:31PM +0530, Vinay Simha BN wrote: > Add documentation for lt070me05000 panel > > Signed-off-by: Vinay Simha BN <simhavcs@xxxxxxxxx> > --- > .../bindings/display/panel/jdi,lt070me05000.txt | 43 ++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > new file mode 100644 > index 0000000..ffe0550 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > @@ -0,0 +1,43 @@ > +JDI model LT070ME05000 1200x1920 7" DSI Panel > + > +Required properties: > +- compatible: should be "jdi,lt070me05000" > +- power-supply: phandle of the regulator that provides the supply voltage > + IOVCC , power supply for LCM (1.8V) > +- vddp-supply: phandle of the regulator that provides the supply voltage > + Power IC supply (3-5V) > +- dcdc_en-supply: phandle of the regulator that provides the supply voltage > + Power IC supply enable, High active > +- reset-gpio: phandle of gpio for reset line > + This should be 8mA, gpio can be configured using mux and pinctrl. > + XRES, Reset, Low active > +- enable-gpio: phandle of gpio for enable line > + LED_EN, LED backlight enable, High active These should all be -gpios instead. > +- vcc-gpio: phandle of regulator/gpio that provides the supply voltage > + VDD, LED power supply (3-5V) Is it a regulator or gpio? > + > +Optional properties: > +- pwm-gpio: phandle of gpio/pwm This should use the PWM binding. It may not be a GPIO on some hosts. > + pwm backlight control, this should be mapped to the backlight level > + display brightness (0x51) > + > +Example: > + > + dsi0: qcom,mdss_dsi@4700000 { > + panel@0 { > + compatible = "jdi,lt070me05000"; > + reg = <0>; > + pinctrl-names = "default"; > + pinctrl-0 = <&dsi_panel_pinctrl>; > + > + power-supply = <&pm8921_lvs5>; > + vddp-supply = <&pm8921_l17>; > + dcdc_en-supply = <&pm8921_lvs7>; > + > + reset-gpio = <&tlmm_pinmux 54 0>; > + enable-gpio = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; > + vcc-gpio = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; > + > + pwm-gpio = <&pm8921_gpio 26 GPIO_ACTIVE_HIGH>; > + }; > + }; > -- > 2.1.2 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html