Re: ACPI vs DT at runtime

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Friday 15 November 2013, Russell King - ARM Linux wrote:
> On Fri, Nov 15, 2013 at 09:52:41AM -0800, Olof Johansson wrote:
> > If we knew exactly what we wanted, it'd be a different story. _We
> > don't_. We're into year FOUR of the device tree conversion and we're just
> > now reaching a point where we think we know what a good solution looks
> > like. The first two years were easy -- they were the trivial devices we're
> > now talking about on ACPI. After that it got harder. Going through all
> > of that again with ACPI? No. No way. Microsoft gets to do it and while
> > they're busy sorting it out, we'll boot with device tree.
> 
> However, there's a very big danger here.  I disagree with the stance
> you're taking.
> 
> It seems that under ACPI and DT, we refer to properties by string names.
> That's good, but do we really want to have different string names for the
> same property.

For all I know, doing this in ACPI is something that is only now being
discussed as Intel wants to be able to reuse the existing features from
DT enabled drivers in the kernel and share the implementation between
embedded x86 SoCs and embedded ARM/PowerPC/MIPS/... SoCs. That part actually
isn't as crazy.

The existing ACPI usage however is basically all binary and cannot be
shared with DT, in particular it won't help for the orthogonal problem of
using ACPI to get "enterprise server" features on ARM64.

> Or worse still, the same hardware property described in two completely
> different ways between ACPI and DT?

I think we should definitely try to have the same peripherals on ACPI
and DT use the same bindings for device-specific properties (once we
have a agreed on how those are done in ACPI), but I think that's the
easier part of the problem.

For anything that defines a connection between two a consumer and a
producer (IRQ, DMA, pinmux, GPIO, regulator, ...), we need subsystem
specific code for each firmware interface, simply because the way to
refer to another node is so wildly different.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux