Please Cc the device tree mailing list (devicetree@xxxxxxxxxxxxxxx) when sending device tree patches. On Sat, Apr 09, 2016 at 11:50:23PM +0200, Rafał Miłecki wrote: > Some devices (e.g. Northstar ones) may have bridges that forward > harmless errors to the ARM core. In such case we need an option to > add a handler ignoring them. > > Signed-off-by: Rafał Miłecki <zajec5@xxxxxxxxx> > --- > .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 6 ++++++ > drivers/pci/host/pcie-iproc-platform.c | 2 ++ > drivers/pci/host/pcie-iproc.c | 17 +++++++++++++++++ > drivers/pci/host/pcie-iproc.h | 1 + > 4 files changed, 26 insertions(+) > > diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt > index 01b88f4..c91b20a 100644 > --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt > @@ -22,6 +22,12 @@ Optional properties: > > - brcm,pcie-ob: Some iProc SoCs do not have the outbound address mapping done > by the ASIC after power on reset. In this case, SW needs to configure it > +- brcm,pcie-hook-abort-handler: During PCI bus probing (device enumeration) > + there can be errors that are expected and harmless. Unfortunately some bridges > + can't be configured to ignore them and they forward them to the ARM core > + triggering die(). > + This property should be set in such case, it will make driver add its own > + handler ignoring such errors. Rather than describing what the kernel should do, this should describe the property of the hardware (e.g. this should be named something like brcm,spurious-probing-abort). Is there absolutely no mechanism to disable this, even if board-specific? Are the aborts synchronous or asynchronous? When specifically do they actually occur? Thanks, Mark. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
