[PATCH v8 00/10] Add DRM Driver for HiSilicon Kirin hi6220 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch set adds a new drm driver for HiSilicon Kirin hi6220 SoC.
Current testing and support board is Hikey board which is one of Linaro
96boards. It is an arm64 open source board. For more information about
this board, please access https://www.96boards.org.

Hardware Detail
---------------
  The display subsystem of Hi6220 SoC is shown as bellow:
 +-----+       +----------+     +-----+     +-------------+
 |     |       |          |     |     |     |             |             	
 | FB  |------>|   ADE    |---->| DSI |---->|   External  |
 |     |       |          |     |     |     |  HDMI/panel |
 +-----+       +----------+     +-----+     +-------------+

- ADE(Advanced Display Engine) is the display controller. It contains 7
channels, 3 overlay compositors and a LDI.
  - A channel looks like: DMA-->clip-->scale-->ctrans(or called csc).
  - Overlay compositor is response to compose planes which come from 7
  channels and pass composed image to LDI.
  - LDI is response to generate timings and RGB data stream.
- DSI converts the RGB data stream from ADE to DSI packets.
- External HDMI/panel module is connected with DSI bus. Now Hikey use a
  ADI's ADV7533 external HDMI chip.

Change History
-------------
Changes in v8:
- Rebase to v4.6-rc3

Changes in v7:
- Add config.mutex protection when accessing mode_config.connector_list.
- Clean up match data getting of kirin_drm_drv.c.
- A few Regs define clean up and typo fixs for ADE crtc and DSI encoder
  driver.
- Fix vblank irq flag "DRIVER_IRQF_SHARED" to "IRQF_SHARED".

Changes in v6:
- Cleanup values part of reg and clocks relevant properties.
- Change "pclk_dsi" clock name to "pclk".

Changes in v5:
- Remove endpoint unit address of dsi output port.
- Use syscon to access ADE media NOC QoS registers instread of directly
  writing registers.
- Use reset controller to reset ADE instead of directly writing registers.

Changes in v4:
- Describe more specific of clocks and ports of binding docs.
- Fix indentation of binding docs.

Changes in v3:
- Move and rename all the files to kirin sub-directory.
  So that we could separate different seires SoCs' driver.
- Make ade as the drm master node.
- Replace drm_platform_init, load, unload implementation.
- Use assigned-clocks to set clock rate.
- Use ports to connect display relevant nodes.
- Rename hisi_drm_dsi.c to dw_drm_dsi.c
- Make encoder type as DRM_MODE_ENCODER_DSI.
- A few cleanup on regs and code.

Changes in v2:
- Remove abtraction layer of plane/crtc/encoder/connector.
- Refactor atomic implementation according to Daniel Vetter's guides:
http://blog.ffwll.ch/2014/11/atomic-modeset-support-for-kms-drivers.html
http://blog.ffwll.ch/2015/09/xdc-2015-atomic-modesetting-for-drivers.html
http://blog.ffwll.ch/2015/08/atomic-modesetting-design-overview.html
- Use bridge instead of slave encoder to connect external HDMI.
- Move dt binding docs to bindings/display/hisilicon directory.

Xinliang Liu (10):
  drm/hisilicon: Add device tree binding for hi6220 display subsystem
  drm/hisilicon: Add hisilicon kirin drm master driver
  drm/hisilicon: Add crtc driver for ADE
  drm/hisilicon: Add plane driver for ADE
  drm/hisilicon: Add vblank driver for ADE
  drm/hisilicon: Add cma fbdev and hotplug
  drm/hisilicon: Add designware dsi encoder driver
  drm/hisilicon: Add designware dsi host driver
  drm/hisilicon: Add support for external bridge
  MAINTAINERS: Add maintainer for hisilicon DRM driver

 .../bindings/display/hisilicon/dw-dsi.txt          |   72 ++
 .../bindings/display/hisilicon/hisi-ade.txt        |   64 ++
 MAINTAINERS                                        |   10 +
 drivers/gpu/drm/Kconfig                            |    2 +
 drivers/gpu/drm/Makefile                           |    1 +
 drivers/gpu/drm/hisilicon/Kconfig                  |    5 +
 drivers/gpu/drm/hisilicon/Makefile                 |    5 +
 drivers/gpu/drm/hisilicon/kirin/Kconfig            |   10 +
 drivers/gpu/drm/hisilicon/kirin/Makefile           |    5 +
 drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c       |  857 ++++++++++++++++
 drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h       |  103 ++
 drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h    |  230 +++++
 drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c    | 1057 ++++++++++++++++++++
 drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c    |  367 +++++++
 drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.h    |   31 +
 15 files changed, 2819 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/hisilicon/dw-dsi.txt
 create mode 100644 Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt
 create mode 100644 drivers/gpu/drm/hisilicon/Kconfig
 create mode 100644 drivers/gpu/drm/hisilicon/Makefile
 create mode 100644 drivers/gpu/drm/hisilicon/kirin/Kconfig
 create mode 100644 drivers/gpu/drm/hisilicon/kirin/Makefile
 create mode 100644 drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
 create mode 100644 drivers/gpu/drm/hisilicon/kirin/dw_dsi_reg.h
 create mode 100644 drivers/gpu/drm/hisilicon/kirin/kirin_ade_reg.h
 create mode 100644 drivers/gpu/drm/hisilicon/kirin/kirin_drm_ade.c
 create mode 100644 drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.c
 create mode 100644 drivers/gpu/drm/hisilicon/kirin/kirin_drm_drv.h

-- 
2.8.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux