On 04/06/2016 03:52 PM, Sjoerd Simons wrote:
clk_get on a disabled clock node will return EPROBE_DEFER, which can
cause drivers to be deferred forever if such clocks are referenced in
their clocks property.
Update the various disabled external clock nodes to default to a
frequency of 0, but don't disable them to prevent this.
Signed-off-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 1 +
arch/arm/boot/dts/r8a7791-porter.dts | 1 +
arch/arm/boot/dts/r8a7791.dtsi | 5 +----
3 files changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 1adf877..da59c28 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -660,6 +660,7 @@
};
&pcie_bus_clk {
+ clock-frequency = <100000000>;
Hmmm, looking at the Koelsch schematics, I don't see this clock. :-/
status = "okay";
};
diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts
index 9554d13..19b257e 100644
--- a/arch/arm/boot/dts/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/r8a7791-porter.dts
@@ -413,6 +413,7 @@
};
&pcie_bus_clk {
+ clock-frequency = <100000000>;
status = "okay";
};
Again, looking at the Porter schematics, I don't see this clock either. :-/
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 8693888..676df63 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1104,8 +1104,7 @@
pcie_bus_clk: pcie_bus {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency = <100000000>;
- status = "disabled";
+ clock-frequency = <0>;
If the clock has a good default frequency, I don't think you need to
remove it. Otherwise you missed USB_EXTAL which is 48 MHz (and can be overridden).
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
