Hi, > From: Kishon Vijay Abraham I > Sent: Tuesday, April 05, 2016 7:54 PM > > Hi, > > On Thursday 03 March 2016 03:39 PM, Yoshihiro Shimoda wrote: > > To handle the VBUS on/off by a regulator driver, this patch adds > > regulator APIs calling in the driver and description about vbus-supply > > in the rcar-gen3-phy-usb2.txt. > > > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> > > Acked-by: Rob Herring <robh@xxxxxxxxxx> > > --- > > .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt | 2 ++ > > drivers/phy/phy-rcar-gen3-usb2.c | 28 ++++++++++++++++++++++ > > 2 files changed, 30 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > > index 86826ca..7243b3b 100644 > > --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > > +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt > > @@ -21,6 +21,8 @@ To use a USB channel where USB 2.0 Host and HSUSB (USB 2.0 Peripheral) are > > combined, the device tree node should set interrupt properties to use the > > channel as USB OTG: > > - interrupts: interrupt specifier for the PHY. > > +- vbus-supply: Phandle to a regulator that provides power to the VBUS. This > > + regulator will be managed during the PHY power on/off sequence. > > Why not use phy-supply from the generic PHY binding? It can then be managed by > the phy core during power_on/power_off. Thank you for the review! I'm afraid, I should have added your address as CC when I sent RFC patch set. Anyway, Rob had a comment about "phy-supply": http://thread.gmane.org/gmane.linux.kernel.renesas-soc/366/focus=406 I agreed with Rob because the document mentioned the followings: Optional Properties: phy-supply: Phandle to a regulator that provides power to the PHY. This regulator will be managed during the PHY power on/off sequence. https://git.kernel.org/cgit/linux/kernel/git/kishon/linux-phy.git/tree/Documentation/devicetree/bindings/phy/phy-bindings.txt?h=next#n13 And then, I changed the "phy-supply" to "vbus-supply" and this driver managed the "vbus-supply". Or, do I misunderstand the document? Best regards, Yoshihiro Shimoda > Thanks > Kishon > > > > > Example (R-Car H3): > > > > diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c > > index 3c647cd..7b14244 100644 > > --- a/drivers/phy/phy-rcar-gen3-usb2.c > > +++ b/drivers/phy/phy-rcar-gen3-usb2.c > > @@ -19,6 +19,7 @@ > > #include <linux/of_address.h> > > #include <linux/phy/phy.h> > > #include <linux/platform_device.h> > > +#include <linux/regulator/consumer.h> > > > > /******* USB2.0 Host registers (original offset is +0x200) *******/ > > #define USB2_INT_ENABLE 0x000 > > @@ -77,6 +78,7 @@ > > struct rcar_gen3_chan { > > void __iomem *base; > > struct phy *phy; > > + struct regulator *vbus; > > bool has_otg; > > }; > > > > @@ -210,6 +212,13 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) > > struct rcar_gen3_chan *channel = phy_get_drvdata(p); > > void __iomem *usb2_base = channel->base; > > u32 val; > > + int ret; > > + > > + if (channel->vbus) { > > + ret = regulator_enable(channel->vbus); > > + if (ret) > > + return ret; > > + } > > > > val = readl(usb2_base + USB2_USBCTR); > > val |= USB2_USBCTR_PLL_RST; > > @@ -220,10 +229,22 @@ static int rcar_gen3_phy_usb2_power_on(struct phy *p) > > return 0; > > } > > > > +static int rcar_gen3_phy_usb2_power_off(struct phy *p) > > +{ > > + struct rcar_gen3_chan *channel = phy_get_drvdata(p); > > + int ret = 0; > > + > > + if (channel->vbus) > > + ret = regulator_disable(channel->vbus); > > + > > + return ret; > > +} > > + > > static struct phy_ops rcar_gen3_phy_usb2_ops = { > > .init = rcar_gen3_phy_usb2_init, > > .exit = rcar_gen3_phy_usb2_exit, > > .power_on = rcar_gen3_phy_usb2_power_on, > > + .power_off = rcar_gen3_phy_usb2_power_off, > > .owner = THIS_MODULE, > > }; > > > > @@ -290,6 +311,13 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev) > > return PTR_ERR(channel->phy); > > } > > > > + channel->vbus = devm_regulator_get_optional(dev, "vbus"); > > + if (IS_ERR(channel->vbus)) { > > + if (PTR_ERR(channel->vbus) == -EPROBE_DEFER) > > + return PTR_ERR(channel->vbus); > > + channel->vbus = NULL; > > + } > > + > > phy_set_drvdata(channel->phy, channel); > > > > provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
