On Thursday 14 November 2013 07:25 AM, Sricharan R wrote: > Some socs have a large number of interrupts requests to service > the needs of its many peripherals and subsystems. All of the interrupt > requests lines from the subsystems are not needed at the same > time, so they have to be muxed to the controllers appropriately. > In such places a interrupt controllers are preceded by an > IRQ CROSSBAR that provides flexibility in muxing the device interrupt > requests to the controller inputs. > > The driver support for the same was added here. > http://marc.info/?l=linux-omap&m=138443167321614&w=2 > > The dts file update to support the crossbar device and convert > peripheral irq numbers to crossbar number are added here. > This series was originally a part of the series [1] and now split > to keep the DTS updates separately as per comments from > Santosh Shilimkar <santosh.shilimkar@xxxxxx> > > Applied this series on top of > git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git > for_3.13/dts > > [1] http://www.kernelhub.org/?msg=356470&p=2 > > Sricharan R (3): > ARM: DTS: DRA: Add crossbar device binding > ARM: DTS: DRA: Replace peripheral interrupt numbers with crossbar > inputs > ARM: DTS: DRA7: Add routable-irqs property for gic node > For entire series, Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
