On Mon, Mar 28, 2016 at 05:27:01AM +0000, Appana Durga Kedareswara Rao wrote: > Hi Soren, > > > -----Original Message----- > > From: Sören Brinkmann [mailto:soren.brinkmann@xxxxxxxxxx] > > Sent: Monday, March 28, 2016 12:58 AM > > To: Appana Durga Kedareswara Rao > > Cc: robh+dt@xxxxxxxxxx; pawel.moll@xxxxxxx; mark.rutland@xxxxxxx; > > ijc+devicetree@xxxxxxxxxxxxxx; galak@xxxxxxxxxxxxxx; Michal Simek; > > vinod.koul@xxxxxxxxx; dan.j.williams@xxxxxxxxx; Anurag Kumar Vulisha; Appana > > Durga Kedareswara Rao; moritz.fischer@xxxxxxxxx; > > laurent.pinchart@xxxxxxxxxxxxxxxx; luis@xxxxxxxxxxxxxxxxx; Srikanth > > Vemula; Anirudha Sarangi; devicetree@xxxxxxxxxxxxxxx; linux-arm- > > kernel@xxxxxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; > > dmaengine@xxxxxxxxxxxxxxx > > Subject: Re: [PATCH v2 5/6] Documentation: DT: vdma: update binding doc for > > AXI CDMA > > > > On Sun, 2016-03-27 at 23:36:06 +0530, Kedareswara rao Appana wrote: > > > This patch updates the device-tree binding doc for adding support for > > > AXI CDMA. > > > > > > Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx> > > > --- > > > ---> Modified commit message as suggested by Vinod. > > > ---> Moved the patch to forward in the series as suggested by vinod. > > > > > > .../devicetree/bindings/dma/xilinx/xilinx_vdma.txt | 18 > > +++++++++++++++++- > > > 1 file changed, 17 insertions(+), 1 deletion(-) > > > > > > diff --git > > > a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > > b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > > index 5841421..2b0c12b 100644 > > > --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > > +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_vdma.txt > > > @@ -8,8 +8,12 @@ target devices. It can be configured to have one channel > > or two channels. > > > If configured as two channels, one is to transmit to the device and > > > another is to receive from the device. > > > > > > +Xilinx AXI CDMA engine, it does transfers between memory-mapped > > > +source address and a memory-mapped destination address. > > > + > > > Required properties: > > > -- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" > > > +- compatible: Should be "xlnx,axi-vdma-1.00.a" or "xlnx,axi-dma-1.00.a" or > > > + "xlnx,axi-cdma-1.00.a"" > > > - #dma-cells: Should be <1>, see "dmas" property below > > > - reg: Should contain VDMA registers location and length. > > > - xlnx,num-fstores: Should be the number of framebuffers as configured in > > h/w. > > > @@ -80,6 +84,18 @@ axi_dma_0: axidma@40400000 { > > > } ; > > > } ; > > > > > > +axi_cdma_0: axicdma@7e200000 { > > > + compatible = "xlnx,axi-cdma-1.00.a"; > > > + #dma-cells = <1>; > > > + reg = < 0x7e200000 0x10000 >; > > > + xlnx,addrwidth = <0x20>; > > > + dma-channel@7e200000 { > > > + compatible = "xlnx,axi-dma-mm2s-channel"; > > > + interrupts = < 0 55 4 >; > > > + xlnx,datawidth = <0x40>; > > > + } ; > > > +} ; > > > > As in the other patch, the node name should be 'dma-controller@...' and the > > inconsistend spacing could be fixed. > > Ok will fix... > > > > > Also, it seems this adds pretty much identical examples that just differ in the > > compat string. Is that really needed? > > Most of the properties are same across the three DMA's > For AXI VDMA there are few required properties that are not required for AXI DMA/CDMA. > That's why added example for the other IP's as well I mean for AXI DMA and CDMA. It needs to be clear what properties are required/valid for each compatible string rather than relying on examples. I should be able to write or validate the examples based on the rest of the text. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
