On Thu, Mar 24, 2016 at 07:48:33PM +0300, Alexey Brodkin wrote: > This add DT bindings documentation for ARC PGU display controller. > > Signed-off-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Pawel Moll <pawel.moll@xxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx> > Cc: Kumar Gala <galak@xxxxxxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: linux-snps-arc@xxxxxxxxxxxxxxxxxxx > --- > > Changes v3 -> v4: (addressing Rob's comments) > * Removed "encoder-slave" from required properties > * Removed "0x" from node names > > Changes v2 -> v3: > * Reverted back to initial larger version of example > with minor fixes (thanks Rob for spotting those). > > Changes v1 -> v2: > * Removed everything except PGU node itself. > > .../devicetree/bindings/display/snps,arcpgu.txt | 71 ++++++++++++++++++++++ > 1 file changed, 71 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/snps,arcpgu.txt > > diff --git a/Documentation/devicetree/bindings/display/snps,arcpgu.txt b/Documentation/devicetree/bindings/display/snps,arcpgu.txt > new file mode 100644 > index 0000000..b126577 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/snps,arcpgu.txt > @@ -0,0 +1,71 @@ > +ARC PGU > + > +This is a display controller found on several development boards produced > +by Synopsys. The ARC PGU is an RGB streamer that reads the data from a > +framebuffer and sends it to a single digital encoder (usually HDMI). > + > +Required properties: > + - compatible: "snps,arcpgu" > + - reg: Physical base address and length of the controller's registers. > + - clocks: A list of phandle + clock-specifier pairs, one for each > + entry in 'clock-names'. > + - clock-names: A list of clock names. For ARC PGU it should contain: > + - "pxlclk" for the clock feeding the output PLL of the controller. > + > +Required sub-nodes: > + - port: The PGU connection to an encoder chip. > + > +Example: > + > +/ { > + ... > + > + pgu@XXXXXXXX { > + compatible = "snps,arcpgu"; > + reg = <0xXXXXXXXX 0x400>; > + clocks = <&clock_node>; > + clock-names = "pxlclk"; > + encoder-slave = <&encoder_node>; Still in the example... Otherwise, Acked-by: Rob Herring <robh@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html