[PATCH v3 01/16] dt: davinci: use proper address after @

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




TI has been using the physical address in DT after the @ in device nodes.
The device tree convention is to use the same address that is used for
the reg property. This updates all davinci DT files to use the proper
convention.

Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
---

v3 changes: This is a new patch.


 arch/arm/boot/dts/da850-enbw-cmc.dts |  8 +++---
 arch/arm/boot/dts/da850-evm.dts      | 26 +++++++++---------
 arch/arm/boot/dts/da850.dtsi         | 52 ++++++++++++++++++------------------
 3 files changed, 43 insertions(+), 43 deletions(-)

diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index 645549e..101d1a1 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -16,14 +16,14 @@
 	compatible = "enbw,cmc", "ti,da850";
 	model = "EnBW CMC";
 
-	soc {
-		serial0: serial@1c42000 {
+	soc@1c00000 {
+		serial0: serial@42000 {
 			status = "okay";
 		};
-		serial1: serial@1d0c000 {
+		serial1: serial@10c000 {
 			status = "okay";
 		};
-		serial2: serial@1d0d000 {
+		serial2: serial@10d000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index ef061e9..1a15db8 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -14,8 +14,8 @@
 	compatible = "ti,da850-evm", "ti,da850";
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
-	soc {
-		pmx_core: pinmux@1c14120 {
+	soc@1c00000 {
+		pmx_core: pinmux@14120 {
 			status = "okay";
 
 			mcasp0_pins: pinmux_mcasp0_pins {
@@ -30,19 +30,19 @@
 				>;
 			};
 		};
-		serial0: serial@1c42000 {
+		serial0: serial@42000 {
 			status = "okay";
 		};
-		serial1: serial@1d0c000 {
+		serial1: serial@10c000 {
 			status = "okay";
 		};
-		serial2: serial@1d0d000 {
+		serial2: serial@10d000 {
 			status = "okay";
 		};
-		rtc0: rtc@1c23000 {
+		rtc0: rtc@23000 {
 			status = "okay";
 		};
-		i2c0: i2c@1c22000 {
+		i2c0: i2c@22000 {
 			status = "okay";
 			clock-frequency = <100000>;
 			pinctrl-names = "default";
@@ -66,17 +66,17 @@
 			};
 
 		};
-		wdt: wdt@1c21000 {
+		wdt: wdt@21000 {
 			status = "okay";
 		};
-		mmc0: mmc@1c40000 {
+		mmc0: mmc@40000 {
 			max-frequency = <50000000>;
 			bus-width = <4>;
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins>;
 		};
-		spi1: spi@1f0e000 {
+		spi1: spi@30e000 {
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
@@ -116,18 +116,18 @@
 				};
 			};
 		};
-		mdio: mdio@1e24000 {
+		mdio: mdio@224000 {
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mdio_pins>;
 			bus_freq = <2200000>;
 		};
-		eth0: ethernet@1e20000 {
+		eth0: ethernet@220000 {
 			status = "okay";
 			pinctrl-names = "default";
 			pinctrl-0 = <&mii_pins>;
 		};
-		gpio: gpio@1e26000 {
+		gpio: gpio@226000 {
 			status = "okay";
 		};
 	};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 226cda7..4294849 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -15,7 +15,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		intc: interrupt-controller {
+		intc: interrupt-controller@fffee000 {
 			compatible = "ti,cp-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -23,7 +23,7 @@
 			reg = <0xfffee000 0x2000>;
 		};
 	};
-	soc {
+	soc@1c00000 {
 		compatible = "simple-bus";
 		model = "da850";
 		#address-cells = <1>;
@@ -31,7 +31,7 @@
 		ranges = <0x0 0x01c00000 0x400000>;
 		interrupt-parent = <&intc>;
 
-		pmx_core: pinmux@1c14120 {
+		pmx_core: pinmux@14120 {
 			compatible = "pinctrl-single";
 			reg = <0x14120 0x50>;
 			#address-cells = <1>;
@@ -150,7 +150,7 @@
 			};
 
 		};
-		edma0: edma@01c00000 {
+		edma0: edma@0 {
 			compatible = "ti,edma3-tpcc";
 			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
 			reg =	<0x0 0x8000>;
@@ -161,19 +161,19 @@
 
 			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
 		};
-		edma0_tptc0: tptc@01c08000 {
+		edma0_tptc0: tptc@8000 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x8000 0x400>;
 			interrupts = <13>;
 			interrupt-names = "edm3_tcerrint";
 		};
-		edma0_tptc1: tptc@01c08400 {
+		edma0_tptc1: tptc@8400 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x8400 0x400>;
 			interrupts = <32>;
 			interrupt-names = "edm3_tcerrint";
 		};
-		edma1: edma@01e30000 {
+		edma1: edma@230000 {
 			compatible = "ti,edma3-tpcc";
 			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
 			reg =	<0x230000 0x8000>;
@@ -184,41 +184,41 @@
 
 			ti,tptcs = <&edma1_tptc0 7>;
 		};
-		edma1_tptc0: tptc@01e38000 {
+		edma1_tptc0: tptc@238000 {
 			compatible = "ti,edma3-tptc";
 			reg =	<0x238000 0x400>;
 			interrupts = <95>;
 			interrupt-names = "edm3_tcerrint";
 		};
-		serial0: serial@1c42000 {
+		serial0: serial@42000 {
 			compatible = "ns16550a";
 			reg = <0x42000 0x100>;
 			reg-shift = <2>;
 			interrupts = <25>;
 			status = "disabled";
 		};
-		serial1: serial@1d0c000 {
+		serial1: serial@10c000 {
 			compatible = "ns16550a";
 			reg = <0x10c000 0x100>;
 			reg-shift = <2>;
 			interrupts = <53>;
 			status = "disabled";
 		};
-		serial2: serial@1d0d000 {
+		serial2: serial@10d000 {
 			compatible = "ns16550a";
 			reg = <0x10d000 0x100>;
 			reg-shift = <2>;
 			interrupts = <61>;
 			status = "disabled";
 		};
-		rtc0: rtc@1c23000 {
+		rtc0: rtc@23000 {
 			compatible = "ti,da830-rtc";
 			reg = <0x23000 0x1000>;
 			interrupts = <19
 				      19>;
 			status = "disabled";
 		};
-		i2c0: i2c@1c22000 {
+		i2c0: i2c@22000 {
 			compatible = "ti,davinci-i2c";
 			reg = <0x22000 0x1000>;
 			interrupts = <15>;
@@ -226,12 +226,12 @@
 			#size-cells = <0>;
 			status = "disabled";
 		};
-		wdt: wdt@1c21000 {
+		wdt: wdt@21000 {
 			compatible = "ti,davinci-wdt";
 			reg = <0x21000 0x1000>;
 			status = "disabled";
 		};
-		mmc0: mmc@1c40000 {
+		mmc0: mmc@40000 {
 			compatible = "ti,da830-mmc";
 			reg = <0x40000 0x1000>;
 			interrupts = <16>;
@@ -239,7 +239,7 @@
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
-		mmc1: mmc@1e1b000 {
+		mmc1: mmc@21b000 {
 			compatible = "ti,da830-mmc";
 			reg = <0x21b000 0x1000>;
 			interrupts = <72>;
@@ -247,37 +247,37 @@
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
-		ehrpwm0: ehrpwm@01f00000 {
+		ehrpwm0: ehrpwm@300000 {
 			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
 			status = "disabled";
 		};
-		ehrpwm1: ehrpwm@01f02000 {
+		ehrpwm1: ehrpwm@302000 {
 			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
 			status = "disabled";
 		};
-		ecap0: ecap@01f06000 {
+		ecap0: ecap@306000 {
 			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
 			status = "disabled";
 		};
-		ecap1: ecap@01f07000 {
+		ecap1: ecap@307000 {
 			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
 			status = "disabled";
 		};
-		ecap2: ecap@01f08000 {
+		ecap2: ecap@308000 {
 			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
 			status = "disabled";
 		};
-		spi1: spi@1f0e000 {
+		spi1: spi@30e000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "ti,da830-spi";
@@ -289,13 +289,13 @@
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};
-		mdio: mdio@1e24000 {
+		mdio: mdio@224000 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x224000 0x1000>;
 		};
-		eth0: ethernet@1e20000 {
+		eth0: ethernet@220000 {
 			compatible = "ti,davinci-dm6467-emac";
 			reg = <0x220000 0x4000>;
 			ti,davinci-ctrl-reg-offset = <0x3000>;
@@ -309,7 +309,7 @@
 					36
 					>;
 		};
-		gpio: gpio@1e26000 {
+		gpio: gpio@226000 {
 			compatible = "ti,dm6441-gpio";
 			gpio-controller;
 			reg = <0x226000 0x1000>;
@@ -323,7 +323,7 @@
 			status = "disabled";
 		};
 
-		mcasp0: mcasp@01d00000 {
+		mcasp0: mcasp@100000 {
 			compatible = "ti,da830-mcasp-audio";
 			reg = <0x100000 0x2000>,
 			      <0x102000 0x400000>;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux