Fix the misuse of goto statement in ks_pcie_get_irq_controller_info() as simple return is more appropriate for this function. While at it add an error log for absence of interrupt controller node. Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Pawel Moll <pawel.moll@xxxxxxx> Cc: Mark Rutland <mark.rutland@xxxxxxx> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx> Cc: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> --- v1 - same as before initial version drivers/pci/host/pci-keystone.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/pci/host/pci-keystone.c b/drivers/pci/host/pci-keystone.c index a2b3ff6..fc153a7 100644 --- a/drivers/pci/host/pci-keystone.c +++ b/drivers/pci/host/pci-keystone.c @@ -181,11 +181,13 @@ static int ks_pcie_get_irq_controller_info(struct keystone_pcie *ks_pcie, *np_temp = of_find_node_by_name(np_pcie, controller); if (!(*np_temp)) { dev_err(dev, "Node for %s is absent\n", controller); - goto out; + return ret; } temp = of_irq_count(*np_temp); - if (!temp) - goto out; + if (!temp) { + dev_err(dev, "No entries in %s\n", controller); + return ret; + } if (temp > max_host_irqs) dev_warn(dev, "Too many %s interrupts defined %u\n", (legacy ? "legacy" : "MSI"), temp); @@ -203,7 +205,6 @@ static int ks_pcie_get_irq_controller_info(struct keystone_pcie *ks_pcie, *num_irqs = temp; ret = 0; } -out: return ret; } @@ -231,6 +232,7 @@ static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie) /* enable error interrupt */ if (ks_pcie->error_irq > 0) ks_dw_pcie_enable_error_irq(ks_pcie->va_app_base); + } /* -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html