Hi Makus, On Thu, Mar 24, 2016 at 10:41 PM, Markus Reichl <m.reichl@xxxxxxxxxxxxx> wrote: > Hi Chanwoo, > > Am 24.03.2016 um 05:30 schrieb Chanwoo Choi: >> Dear Anand and Tobias, >> >> To Anand, >> First of all, thanks to your test on previous patchset. >> I removed the your tested-by tag from this version >> because I modified the devfreq core using DEVFREQ_TRANSITION_NOTIFIER notifier. >> I think that this patch-set need to test with this patchset. >> If you possible, could you please test this patch-set? Thanks in advance. >> >> To Tobias, >> I fixed the following issues reported by you. Thanks your test and report. >> - RCU locking issue >> - debugfs error during kernel booting >> >> Best Regards, >> Chanwoo Choi > > This set works fine on odroid U3 but gives the following with dmesg |grep devfreq: > > [ 2.066890] devfreq bus_dmc: Couldn't update frequency transition information. > [ 2.190238] devfreq bus_leftbus: Couldn't update frequency transition information. Tobias already replied it about this message. The devfreq core need to be modified about this issue. But, It is no problem for working exynos-bus.c driver. If you possible, could you send the Tested-by tag reply about this patch-set? Best Regards, Chanwoo Choi > > Thanks, > -- > Markus Reichl > >> >> On 2016년 03월 24일 13:25, Chanwoo Choi wrote: >>> Dear all, >>> >>> This patchset uses the DEVFREQ_TRANSITION_NOTIFIER notifier to connecth >>> devfreq device using ondemand governor and devfreq device using passive >>> governor. Also I fix the some issue reported by 'Tobias Jakobi' and add the >>> detailed issue information. But, this patchset don't modify the anything of >>> Device Tree patches (patch12 ~ patch21) which already got the reviewed-by >>> from Exynos Soc Maintainer. >>> >>> I tested it on exynos3250-rinato and exynos4412-odroidu3 board. >>> >>> [Description] >>> This patch-set includes the two features as following. The generic exynos bus >>> frequency driver is able to support almost Exynos SoCs for bus frequency >>> scaling. And the new passive governor is able to make the dependency on >>> between devices for frequency/voltage scaling. I had posted the patch-set[1] >>> with the similiar concept. This is is revised version for exynos bus frequency. >>> - Generic exynos bus frequency driver >>> - New passive governor of DEVFREQ framework >>> [1] https://lkml.org/lkml/2015/1/7/872 >>> : [PATCHv3 0/8] devfreq: Add generic exynos memory-bus frequency driver >>> >>> Changes from v4: >>> (https://lkml.org/lkml/2015/12/14/43) >>> - Add new DEVFREQ_TRANSITION_NOTIFIER notifier. The passive >>> devfreq device recevie the changed frequency of parent >>> devfreq device through DEVFREQ_TRANSITION_NOTIFIER. >>> - Add governor type to identify thme using the defined constant >>> - Modify the passive governor using the DEVFREQ_TRANSITION_NOTIFIER notifier. >>> - Fix the RCU locking probrlm (Reported-by: Tobias Jakobi) >>> - Fix the debugfs error during the kernel booting (Reported-by: Tobias Jakobi) >>> >>> Changes from v3: >>> (https://lkml.org/lkml/2015/12/11/75) >>> - Add the reviewed-by tag from Krzysztof Kozlowski (patch2/3/13/14/15/16/17) >>> - Fix typo of the description on patch14 >>> - Modify the subject and description of patch17 >>> - Reorder the 'bus_xxx' device tree node alphabetically in >>> both exynos3250-rinato/monk.dts and exynos4412-trats/odroidu3 >>> >>> Changes from v2: >>> (https://lkml.org/lkml/2015/12/8/869) >>> - Fix typo on documentation >>> - Modify the more appropriate sentence on patch description >>> - Add the detailed description about both parent and passive bus device >>> - Modify the DMC frequency for Exynos4x12 DMC bus (200MHz -> 267MHz) >>> - Modify the voltage of 200MHz was included in Exynos3250 DMC bus (800mV -> 825mV) >>> - Rename OPP nodes as 'opp@<opp-hz>' >>> - Delete the duplicate 'opp-microvolt' property of passive devfreq device >>> - Reorder the 'bus_xxx' device tree node alphabetically in exynos3250-rinato/monk.dts >>> - Reorder the 'bus_xxx' device tree node alphabetically in exynos4412-trats/odroidu3 >>> - Add new exynos4412-ppmu-common.dtsi to remove the duplicate PPMU dt node >>> on rinato/monk/trats2/odroid-u3 board >>> - Add the log message if bus device is registered to devfreq framework successfully >>> - Add the reviewed-by tag from Krzysztof Kozlowski >>> - Add the tested-by tag from Anand Moon on Odroid U3 >>> - Add 'SAMSUNG BUS FREQUENCY DRIVER' entry to MAINTAINERS >>> >>> Changes from v1: >>> (https://lkml.org/lkml/2015/11/26/260) >>> - Check whether the instance of regulator is NULL or not >>> when executing regulator_disable() because of only parent >>> devfreq device has the regulator instance. After fixing it, >>> the wake-up from suspend state is well working. (patch1) >>> - Fix bug which checks 'bus-clk' instead of 'bus->regulator' >>> after calling devm_clk_get() (on patch1) >>> - Update the documentation to remove the description about >>> DEVFREQ-EVENT subsystem (on patch2) >>> - Add the full name of DMC (Dynamic Memory Controller) (on patch2) >>> - Modify the detailed correlation of buses for Exynos3250 >>> on documentation (patch2) >>> - Add the MFC bus node for Exynos3250 (on patch11, patch12) >>> - Fix the duplicate frequency of bus_display on Exynos4x12.dtsi >>> - Add the PPMU node for exynos4412-odroidu3 >>> - Add the support of bus frequency for exynos4412-odroidu3 >>> >>> Detailed descirption for patch-set: >>> 1. Add generic exynos bus frequency driver >>> : This patch-set adds the generic exynos bus frequency driver for AXI bus >>> of sub-blocks in exynos SoC. The Samsung Exynos SoC have the common >>> architecture for bus between DRAM and sub-blocks in SoC. >>> >>> There are the different buses according to Exynos SoC because Exynos SoC >>> has the differnt sub-blocks and bus speed. In spite of this difference >>> among Exynos SoCs, this driver is able to support almost Exynos SoC by adding >>> unique data of each bus in the devicetree file. >>> >>> In devicetree, each bus node has a bus clock, regulator, operation-point >>> and devfreq-event devices which measure the utilization of each bus block. >>> >>> For example, >>> - The bus of DMC block in exynos3250.dtsi are listed below: >>> >>> bus_dmc: bus_dmc { >>> compatible = "samsung,exynos-bus"; >>> clocks = <&cmu_dmc CLK_DIV_DMC>; >>> clock-names = "bus"; >>> operating-points-v2 = <&bus_dmc_opp_table>; >>> status = "disabled"; >>> }; >>> >>> bus_dmc_opp_table: opp_table1 { >>> compatible = "operating-points-v2"; >>> opp-shared; >>> >>> opp@50000000 { >>> opp-hz = /bits/ 64 <50000000>; >>> opp-microvolt = <800000>; >>> }; >>> opp@100000000 { >>> opp-hz = /bits/ 64 <100000000>; >>> opp-microvolt = <800000>; >>> }; >>> opp@134000000 { >>> opp-hz = /bits/ 64 <134000000>; >>> opp-microvolt = <800000>; >>> }; >>> opp@200000000 { >>> opp-hz = /bits/ 64 <200000000>; >>> opp-microvolt = <825000>; >>> }; >>> opp@400000000 { >>> opp-hz = /bits/ 64 <400000000>; >>> opp-microvolt = <875000>; >>> }; >>> }; >>> >>> - Usage case to handle the frequency and voltage of bus on runtime >>> in exynos3250-rinato.dts are listed below: >>> >>> &bus_dmc { >>> devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>; >>> vdd-supply = <&buck1_reg>; /* VDD_MIF */ >>> status = "okay"; >>> }; >>> >>> 2. Add new passive governor of DEVFREQ framework (patch5-patch7) >>> : This patch-set add the new passive governor for DEVFREQ framework. >>> The existing governors (ondemand, performance and so on) are used for DVFS >>> (Dynamic Voltage and Frequency Scaling) drivers. The existing governors >>> are independently used for specific device driver which don't give the >>> influence to other device drviers and also don't receive the effect from >>> other device drivers. >>> >>> The passive governor depends on operation of parent driver with existing >>> governors(ondemand, performance and so on) extremely and is not able to >>> decide the new frequency by oneself. According to the decided new frequency >>> of parent driver with governor, the passive governor uses it to decide >>> the appropriate frequency for own device driver. The passive governor >>> must need the following information from device tree: >>> >>> For exameple, >>> There are one more bus device drivers in Exynos3250 which need to >>> change their source clock according to their utilization on runtime. >>> But, they share the same power line (e.g., regulator). So, LEFTBUS bus >>> driver is operated as parent with ondemand governor and then the rest >>> device driver with passive governor. >>> >>> The buses of Internal block in exynos3250.dtsi are listed below: >>> When LEFTBUS bus driver (parent) changes the bus frequency with >>> ondemand governor on runtime, the rest bus devices which sharing >>> the same power line (VDD_INT) will change the each bus frequency >>> according to the decision of LEFTBUS bus driver (parent). >>> >>> - INT (Internal) block >>> : VDD_INT |--- LEFTBUS >>> |--- PERIL >>> |--- MFC >>> |--- G3D >>> |--- RIGHTBUS >>> |--- FSYS >>> |--- LCD0 >>> |--- PERIR >>> |--- ISP >>> |--- CAM >>> >>> - The buss of INT block in exynos3250.dtsi are listed below: >>> bus_leftbus: bus_leftbus { >>> compatible = "samsung,exynos-bus"; >>> clocks = <&cmu CLK_DIV_GDL>; >>> clock-names = "bus"; >>> operating-points-v2 = <&bus_leftbus_opp_table>; >>> status = "disabled"; >>> }; >>> >>> bus_rightbus: bus_rightbus { >>> compatible = "samsung,exynos-bus"; >>> clocks = <&cmu CLK_DIV_GDR>; >>> clock-names = "bus"; >>> operating-points-v2 = <&bus_leftbus_opp_table>; >>> status = "disabled"; >>> }; >>> >>> (Omit the rest bus dt node) >>> >>> - Usage case to handle the frequency and voltage of bus on runtime >>> in exynos3250-rinato.dts are listed below: >>> /* Parent bus device of VDD_INT */ >>> &bus_leftbus { >>> devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; >>> vdd-supply = <&buck3_reg>; >>> status = "okay"; >>> }; >>> >>> /* Passive bus device depend on LEFTBUS bus. */ >>> &bus_rightbus { >>> devfreq = <&bus_leftbus>; /* 'devfreq' property indicates >>> the phandle of parent device. */ >>> status = "okay"; >>> }; >>> >>> (Omit the rest bus dt node) >>> >>> Chanwoo Choi (21): >>> PM / devfreq: exynos: Add generic exynos bus frequency driver >>> PM / devfreq: exynos: Add documentation for generic exynos bus frequency driver >>> PM / devfreq: Add devfreq_get_devfreq_by_phandle() >>> PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifier >>> PM / devfreq: Add governer type with unique number >>> PM / devfreq: Add new passive governor >>> PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor >>> PM / devfreq: exynos: Update documentation for bus devices using passive governor >>> PM / devfreq: exynos: Add the detailed correlation between sub-blocks and power line >>> PM / devfreq: exynos: Remove unused exynos4/5 busfreq driver >>> MAINTAINERS: Add samsung bus frequency driver entry >>> ARM: dts: Add DMC bus node for Exynos3250 >>> ARM: dts: Add DMC bus frequency for exynos3250-rinato/monk >>> ARM: dts: Add bus nodes using VDD_INT for Exynos3250 >>> ARM: dts: Add bus nodes using VDD_MIF for Exynos4x12 >>> ARM: dts: Add bus nodes using VDD_INT for Exynos4x12 >>> ARM: dts: Add bus nodes using VDD_MIF for Exynos4210 >>> ARM: dts: Add exynos4412-ppmu-common dtsi to delete duplicate PPMU nodes >>> ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato >>> ARM: dts: Expand the voltage range of buck1/3 regulator for exynos4412-odroidu3 >>> ARM: dts: Add support of bus frequency for exynos4412-trats/odroidu3 >>> >>> .../devicetree/bindings/devfreq/exynos-bus.txt | 390 ++++++++ >>> MAINTAINERS | 9 + >>> arch/arm/boot/dts/exynos3250-monk.dts | 47 +- >>> arch/arm/boot/dts/exynos3250-rinato.dts | 88 +- >>> arch/arm/boot/dts/exynos3250.dtsi | 181 ++++ >>> arch/arm/boot/dts/exynos4210.dtsi | 159 +++ >>> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 56 +- >>> arch/arm/boot/dts/exynos4412-ppmu-common.dtsi | 50 + >>> arch/arm/boot/dts/exynos4412-trats2.dts | 88 +- >>> arch/arm/boot/dts/exynos4x12.dtsi | 174 ++++ >>> drivers/devfreq/Kconfig | 35 +- >>> drivers/devfreq/Makefile | 4 +- >>> drivers/devfreq/devfreq.c | 224 ++++- >>> drivers/devfreq/exynos-bus.c | 561 +++++++++++ >>> drivers/devfreq/exynos/Makefile | 3 - >>> drivers/devfreq/exynos/exynos4_bus.c | 1055 -------------------- >>> drivers/devfreq/exynos/exynos4_bus.h | 110 -- >>> drivers/devfreq/exynos/exynos5_bus.c | 431 -------- >>> drivers/devfreq/exynos/exynos_ppmu.c | 119 --- >>> drivers/devfreq/exynos/exynos_ppmu.h | 86 -- >>> drivers/devfreq/governor.h | 21 + >>> drivers/devfreq/governor_passive.c | 192 ++++ >>> drivers/devfreq/governor_performance.c | 1 + >>> drivers/devfreq/governor_powersave.c | 1 + >>> drivers/devfreq/governor_simpleondemand.c | 1 + >>> drivers/devfreq/governor_userspace.c | 1 + >>> include/linux/devfreq.h | 70 ++ >>> 27 files changed, 2209 insertions(+), 1948 deletions(-) >>> create mode 100644 Documentation/devicetree/bindings/devfreq/exynos-bus.txt >>> create mode 100644 arch/arm/boot/dts/exynos4412-ppmu-common.dtsi >>> create mode 100644 drivers/devfreq/exynos-bus.c >>> delete mode 100644 drivers/devfreq/exynos/Makefile >>> delete mode 100644 drivers/devfreq/exynos/exynos4_bus.c >>> delete mode 100644 drivers/devfreq/exynos/exynos4_bus.h >>> delete mode 100644 drivers/devfreq/exynos/exynos5_bus.c >>> delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.c >>> delete mode 100644 drivers/devfreq/exynos/exynos_ppmu.h >>> create mode 100644 drivers/devfreq/governor_passive.c >>> >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
