This adds the blsp_dma node to the device tree and the required properties for using DMA with serial Signed-off-by: Matthew McClintock <mmcclint@xxxxxxxxxxxxxx> --- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 4 ++++ arch/arm/boot/dts/qcom-ipq4019.dtsi | 15 +++++++++++++++ 2 files changed, 19 insertions(+) diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi index 2c347ad..b9457dd2 100644 --- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi @@ -72,6 +72,10 @@ }; }; + blsp_dma: dma@7884000 { + status = "ok"; + }; + spi_0: spi@78b5000 { pinctrl-0 = <&spi_0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 3cd42c0..5c08d19 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -123,6 +123,17 @@ interrupts = <0 208 0>; }; + blsp_dma: dma@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + status = "disabled"; + }; + spi_0: spi@78b5000 { compatible = "qcom,spi-qup-v2.2.1"; reg = <0x78b5000 0x600>; @@ -224,6 +235,8 @@ clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 1>, <&blsp_dma 0>; + dma-names = "rx", "tx"; }; serial@78b0000 { @@ -234,6 +247,8 @@ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp_dma 3>, <&blsp_dma 2>; + dma-names = "rx", "tx"; }; watchdog@b017000 { -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html