Hi Rob, sorry I've sent v3 at the same time as you answered to v2. I'll take your comments into account for v4. Brian, any preference between 4byte-opcodes or m25p-4byte-opcodes? Best regards, Cyrille Le 23/03/2016 13:49, Rob Herring a écrit : > On Tue, Mar 22, 2016 at 10:13 AM, Cyrille Pitchen > <cyrille.pitchen@xxxxxxxxx> wrote: >> This patch adds a new optional DT property which enables an alternative >> way of supporting memory size above 16MiB (128Mib). This new mechanism >> translates the regular 3byte-address op codes into their 4byte-address >> version whereas the old/default mecanism makes the SPI memory enter its >> 4byte-address mode, which has annoying side effects for early bootloaders. >> >> We cannot discover at run time whether the SPI NOR memory supports the >> 4byte-address op codes. For instance both Macronix MX25L25635E and >> MX25L25673G share the same JEDEC ID (C22019 without any extension byte). >> However the first one doesn't support 4byte-address op codes whereas the >> second one does. >> >> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx> >> --- >> Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt | 11 +++++++++++ >> 1 file changed, 11 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt >> index 2c91c03e7eb0..8be610482089 100644 >> --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt >> +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt >> @@ -66,6 +66,17 @@ Optional properties: >> Refer to your chips' datasheet to check if this is supported >> by your chip. >> >> +- m25p,4byte-opcodes: For memory size above 16MiB (128Mib), use the dedicated > > m25p is not a vendor. So drop it or m25p-4byte-opcodes. > >> + 4byte-address opcodes instead of entering the 4byte >> + address mode. This mode changes the internal state of the >> + chip so may conflict with some early boot loaders, which >> + expect to use the regular (Fast) Read opcodes with 3byte >> + address. >> + However 4byte-address opcodes are not supported by all >> + chips and support for them can not be detected at runtime. > > s/can not/cannot/ > >> + Refer to you chip's datasheet to check if this is >> + supported by your chip. >> + >> Example: >> >> flash: m25p80@0 { >> -- >> 1.8.2.2 >> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html