Hello,
This patch series moves sama5d3 SoCs and boards to the new at91 clk framework
(based on common clk framework).
This patch series depends on following patch series:
1) "ARM: at91/dt: split sama5d3 definition" (v1)
3) "ARM: at91: move to common clk framework" (v5)
Best Regards,
Boris
Changes since v2:
- rework dt bindings:
* replace "atmel,clk-id" property by the standard "reg" property
* reference system, peripheral and programmable clks using the direct
clk node instead of the parent node plus a clk id
- add usb_clk to usb ehci controller node
Changes since v1:
- remove references to peripheral id macros
- remove old clk definitions after moving to new clk framework
Boris BREZILLON (6):
ARM: at91: prepare sama5 dt boards transition to common clk
ARM: at91: prepare common clk transition for sama5d3 SoC
ARM: at91/dt: define sama5d3 clocks
ARM: at91/dt: define sama5d3xek's main clk frequency
ARM: at91: move sama5d3 SoC to common clk
ARM: at91/dt: remove old clk material
arch/arm/boot/dts/sama5d3.dtsi | 379 ++++++++++++++++++++++++++++++++++-
arch/arm/boot/dts/sama5d3_can.dtsi | 20 ++
arch/arm/boot/dts/sama5d3_emac.dtsi | 11 +
arch/arm/boot/dts/sama5d3_gmac.dtsi | 11 +
arch/arm/boot/dts/sama5d3_lcd.dtsi | 17 ++
arch/arm/boot/dts/sama5d3_mci2.dtsi | 12 ++
arch/arm/boot/dts/sama5d3_tcb1.dtsi | 12 ++
arch/arm/boot/dts/sama5d3_uart.dtsi | 21 ++
arch/arm/boot/dts/sama5d3xcm.dtsi | 17 +-
arch/arm/mach-at91/Kconfig | 1 -
arch/arm/mach-at91/board-dt-sama5.c | 10 +-
arch/arm/mach-at91/sama5d3.c | 342 -------------------------------
12 files changed, 497 insertions(+), 356 deletions(-)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
