Hi,
Le lundi 29 février 2016 à 13:51 -0800, Tony Lindgren a écrit :
> Hi,
>
> * Paul Kocialkowski <contact@xxxxxxxx> [160228 04:40]:
> >
> > The LG Optimus Black codename sniper is a smartphone that was designed and
> > manufactured by LG Electronics (LGE) and released back in 2011.
> > It is using an OMAP3630 SoC, GP version.
> >
> > This adds devicetree support for the device, with only a few basic features
> > supported, such as debug uart, i2c, internal emmc and external mmc.
> ...
> >
> > +&i2c1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&i2c1_pins>;
> > +
> > + clock-frequency = <2600000>;
> > +
> > + twl: twl@48 {
> > + reg = <0x48>;
> > + interrupts = <7>; /* SYS_NIRQ cascaded to intc */
> > + interrupt-parent = <&intc>;
> > +
> > + power {
> > + compatible = "ti,twl4030-power";
> > + ti,use_poweroff;
> > + };
> > + };
> > +};
> Chances are this devices supports cutting off the voltages and
> the high frequency oscillator during idle. So you may want to
> at some point set compatible = "ti,twl4030-power-idle-osc-off"
> here.
>
> Anyways, applying the dts changes into omap-for-v4.6/dt thanks.
It seems that v3 of this patch was merged into your tree instead of v4, which
contains some improvements over v3.
Should I submit a cleanup patch with the diff or can you use v4 instead (if not
too late)?
Cheers,
--
Paul Kocialkowski, low-level free software developer on embedded devices
Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/
Attachment:
signature.asc
Description: This is a digitally signed message part
