On Wed, Mar 09, 2016 at 06:16:58PM -0800, Stefan Agner wrote: > Add device-tree bindings of Vybrids LPDDR2/DDR3 SDRAM Memory > Controller. Access to the device is required to put the memory > into self-refresh mode. > > Signed-off-by: Stefan Agner <stefan@xxxxxxxx> > --- > .../bindings/arm/freescale/fsl,vf610-ddrmc.txt | 23 ++++++++++++++++++++++ Move to bindings/memory-controllers/ > 1 file changed, 23 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/freescale/fsl,vf610-ddrmc.txt > > diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-ddrmc.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-ddrmc.txt > new file mode 100644 > index 0000000..56a71d6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,vf610-ddrmc.txt > @@ -0,0 +1,23 @@ > +Freescale Vybrid LPDDR2/DDR3 SDRAM Memory Controller > + > +The memory controller supports high performance applications for 16-bit or > +8-bit DDR2, or LPDDR SDRAM memories. > + > +Required properties: > +- compatible: "fsl,vf610-ddrmc" > +- reg: the register range of the DDRMC registers > +- clocks: DDRMC main clock to clock memory and access registers. > +- clock-names: Must contain "ddrc", matching entry in the clocks property. > +- fsl,has-cke-reset-pulls: > + States whether pull-down/up are populated on DDR CKE/RESET > + signals to allow using DDR self-refresh modes (see Vybrid > + Hardware Development Guide for details). > + > +Example: > + ddrmc: ddrmc@400ae000 { memory-controller@... > + compatible = "fsl,vf610-ddrmc"; > + reg = <0x400ae000 0x1000>; > + clocks = <&clks VF610_CLK_DDRMC>; > + clock-names = "ddrc"; > + fsl,has-cke-reset-pulls; > + } > -- > 2.7.2 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html