Re: IMX27: How to do 22k pull-up with the pinctrl ?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On Monday, November 11, 2013 08:03 PM, Mark Rutland wrote:
On Mon, Nov 11, 2013 at 10:45:30AM +0000, Chris Ruehl wrote:
Hi,

Hi,

While this does involve device tree, it's not strictly a device tree
problem, and the people best placed to answer your question don't seem
to be on Cc. You'd get better responses if you used get_maintainer.pl,
or looked at the commit history of the driver or binding to find people
likely to be able to help.

I've added Dong Aisheng, Shawn Guo, and Linus Walleij to Cc, as they had
signed-off-bys on the binding document.

Mark.

Dear Mark
Thanks.
I'm late with my answer, my data-center support change switches and forget to told the users about this.. I had no email for a while. Welcome to Hong Kong!




while I port the static code to the DT I step into the problem to
set the PSCR for the sdhc2 ports to 22k pull-up
I look for something like described in
      pinctrl/fsl,imx-pinctrl.txt

the fsl,imx27-pinctrl only say 0/1 dis/enable pull up but not the strength.


pinctrl_sdhc2_1: sdhc2-1 {
                          fsl,pins =<
                                  MX27_PAD_SD2_D0__SD2_D0  0x1
                                  MX27_PAD_SD2_D1__SD2_D1  0x1
                                  MX27_PAD_SD2_D2__SD2_D2  0x1
                                  MX27_PAD_SD2_D3__SD2_D3  0x1
                                  MX27_PAD_SD2_CLK__SD2_CLK  0x1
                                  MX27_PAD_SD2_CMD__SD2_CMD  0x1
                          >;
                  };

its setup in board specific c-file

/* 22k pull-up for sd2 pins  */
          reg = __raw_readw(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + MX27_SYS_PSCR));
          reg&= ~0xfff0;
          reg |= 0xfff0;
          __raw_writew(reg, MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR + MX27_SYS_PSCR));


Any successions?

Regards
Chris
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
GTSYS Limited RFID Technology
A01 24/F Gold King Industrial Bld
35-41 Tai Lin Pai Road, Kwai Chung, Hong Kong
Fax (852) 8167 4060 - Tel (852) 3598 9488

Disclaimer: http://www.gtsys.com.hk/email/classified.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux