Add a driver for the Tegra-AGIC interrupt controller which is compatible
with the ARM GIC-400 interrupt controller.
The Tegra AGIC (Audio GIC) is part of the Audio Processing Engine (APE) on
Tegra210 and can route interrupts to either the GIC for the CPU subsystem
or the Audio DSP (ADSP) within the APE. The AGIC uses CPU interface 0 to
route interrupts to the CPU GIC and CPU interface 1 to route interrupts to
the ADSP.
The APE is located within its own power domain on the chip and so the
AGIC needs to manage both the power domain and its clocks. Commit
afbbd2338176 ("irqchip/gic: Document optional Clock and Power Domain
properties") adding clock and power-domain properties to the GIC binding
and so the aim would be to make use of these to handle power management
(however, this is very much dependent upon adding support for generic
PM domains for Tegra which is still a work-in-progress).
With the AGIC being located in a different power domain to the main CPU
cluster this means that:
1. The interrupt controller cannot be registered via IRQCHIP_DECLARE()
because it needs to be registered as a platform device so that the
generic PM domain core will ensure that the power domain is available
before probing.
2. The interrupt controller cannot be suspended/restored based upon
changes in the CPU power state and needs to use runtime-pm instead.
The GIC platform driver has been implemented by making the following
changes to the core GIC driver:
1. Remove the dependency on CONFIG_CPU_PM from PM specific variables and
functions so that they can be used by the platform driver even when
CONFIG_CPU_PM is not selected.
2. Move the code that maps the GIC registers and parses the device-tree
blob into a new function called gic_of_setup() that can be used by
both the platform driver as well as the existing driver.
3. Add and register platform driver for the GIC. The platform driver
uses the PM_CLK framework for managing the clocks used by the GIC
and so select CONFIG_PM_CLK.
Finally, a couple other notes on the implementation are:
1. Currently the GIC platform driver only supports non-root GICs and
assumes that the GIC has a parent interrupt. It is assumed that
root interrupt controllers need to be initialised early.
2. There is no specific suspend handling for platform devices because
non-wakeup interrupts will be disabled by the kernel during late
suspend.
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
.../bindings/interrupt-controller/arm,gic.txt | 1 +
drivers/irqchip/Kconfig | 1 +
drivers/irqchip/irq-gic.c | 210 ++++++++++++++++++---
3 files changed, 189 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
index c471d1a7a8ea..9d84a86d0934 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
@@ -21,6 +21,7 @@ Main node required properties:
"arm,pl390"
"arm,tc11mp-gic"
"brcm,brahma-b15-gic"
+ "nvidia,tegra210-agic"
"qcom,msm-8660-qgic"
"qcom,msm-qgic2"
- interrupt-controller : Identifies the node as an interrupt controller
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 7e8c441ff2de..ececa3cb6c0a 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -7,6 +7,7 @@ config ARM_GIC
select IRQ_DOMAIN
select IRQ_DOMAIN_HIERARCHY
select MULTI_IRQ_HANDLER
+ select PM_CLK
config ARM_GIC_MAX_NR
int
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 7cc5380db298..9e7cf7abf757 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -26,6 +26,7 @@
#include <linux/module.h>
#include <linux/list.h>
#include <linux/smp.h>
+#include <linux/clk.h>
#include <linux/cpu.h>
#include <linux/cpu_pm.h>
#include <linux/cpumask.h>
@@ -37,6 +38,9 @@
#include <linux/irqdomain.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
+#include <linux/platform_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/irqchip.h>
#include <linux/irqchip/chained_irq.h>
@@ -72,7 +76,6 @@ struct gic_chip_data {
struct irq_chip chip;
union gic_base dist_base;
union gic_base cpu_base;
-#ifdef CONFIG_CPU_PM
u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
u32 saved_spi_active[DIV_ROUND_UP(1020, 32)];
u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
@@ -80,7 +83,6 @@ struct gic_chip_data {
u32 __percpu *saved_ppi_enable;
u32 __percpu *saved_ppi_active;
u32 __percpu *saved_ppi_conf;
-#endif
struct irq_domain *domain;
unsigned int gic_irqs;
#ifdef CONFIG_GIC_NON_BANKED
@@ -512,7 +514,6 @@ int gic_cpu_if_down(unsigned int gic_nr)
return 0;
}
-#ifdef CONFIG_CPU_PM
/*
* Saves the GIC distributor registers during suspend or idle. Must be called
* with interrupts disabled but before powering down the GIC. After calling
@@ -728,11 +729,6 @@ static void gic_pm_init(struct gic_chip_data *gic)
if (gic == &gic_data[0])
cpu_pm_register_notifier(&gic_notifier_block);
}
-#else
-static void gic_pm_init(struct gic_chip_data *gic)
-{
-}
-#endif
#ifdef CONFIG_SMP
static void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
@@ -1227,27 +1223,42 @@ static bool gic_check_eoimode(struct device_node *node, void __iomem **base)
return true;
}
-int __init
-gic_of_init(struct device_node *node, struct device_node *parent)
+static int gic_of_setup(struct device_node *node, void __iomem **dist_base,
+ void __iomem **cpu_base, u32 *percpu_offset)
{
- void __iomem *cpu_base;
- void __iomem *dist_base;
- u32 percpu_offset;
- int irq, ret;
-
if (WARN_ON(!node))
return -ENODEV;
- dist_base = of_iomap(node, 0);
- if (WARN(!dist_base, "unable to map gic dist registers\n"))
+ *dist_base = of_iomap(node, 0);
+ if (WARN(!*dist_base, "unable to map gic dist registers\n"))
return -ENOMEM;
- cpu_base = of_iomap(node, 1);
- if (WARN(!cpu_base, "unable to map gic cpu registers\n")) {
- iounmap(dist_base);
+ *cpu_base = of_iomap(node, 1);
+ if (WARN(!*cpu_base, "unable to map gic cpu registers\n")) {
+ iounmap(*dist_base);
return -ENOMEM;
}
+ if (of_property_read_u32(node, "cpu-offset", percpu_offset))
+ *percpu_offset = 0;
+
+ return 0;
+}
+
+int __init gic_of_init(struct device_node *node, struct device_node *parent)
+{
+ void __iomem *cpu_base;
+ void __iomem *dist_base;
+ u32 percpu_offset;
+ int irq, ret;
+
+ if (WARN_ON(gic_cnt >= CONFIG_ARM_GIC_MAX_NR))
+ return -EINVAL;
+
+ ret = gic_of_setup(node, &dist_base, &cpu_base, &percpu_offset);
+ if (ret)
+ return ret;
+
/*
* Disable split EOI/Deactivate if either HYP is not available
* or the CPU interface is too small.
@@ -1255,9 +1266,6 @@ gic_of_init(struct device_node *node, struct device_node *parent)
if (gic_cnt == 0 && !gic_check_eoimode(node, &cpu_base))
static_key_slow_dec(&supports_deactivate);
- if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
- percpu_offset = 0;
-
ret = __gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset,
&node->fwnode);
if (ret) {
@@ -1290,6 +1298,162 @@ IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
+static int gic_runtime_resume(struct device *dev)
+{
+ struct gic_chip_data *gic = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_clk_resume(dev);
+ if (ret)
+ return ret;
+
+ gic_dist_restore(gic);
+ gic_cpu_restore(gic);
+
+ return 0;
+}
+
+static int gic_runtime_suspend(struct device *dev)
+{
+ struct gic_chip_data *gic = dev_get_drvdata(dev);
+
+ gic_dist_save(gic);
+ gic_cpu_save(gic);
+
+ return pm_clk_suspend(dev);
+}
+
+static int gic_get_clocks(struct device *dev)
+{
+ struct clk *clk;
+ unsigned int i, count;
+ int ret;
+
+ if (!dev || !dev->of_node)
+ return -EINVAL;
+
+ count = of_count_phandle_with_args(dev->of_node, "clocks",
+ "#clock-cells");
+ if (count == 0)
+ return -ENODEV;
+
+ ret = pm_clk_create(dev);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < count; i++) {
+ clk = of_clk_get(dev->of_node, i);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to get clock at index %d\n", i);
+ ret = PTR_ERR(clk);
+ goto error;
+ }
+
+ ret = pm_clk_add_clk(dev, clk);
+ if (ret) {
+ dev_err(dev, "failed to add clock at index %d\n", i);
+ clk_put(clk);
+ goto error;
+ }
+ }
+
+ return 0;
+
+error:
+ pm_clk_destroy(dev);
+
+ return ret;
+}
+
+static int gic_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct gic_chip_data *gic;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+ u32 percpu_offset;
+ int ret, irq;
+
+ if (dev->of_node == NULL)
+ return -EINVAL;
+
+ gic = devm_kzalloc(dev, sizeof(*gic), GFP_KERNEL);
+ if (!gic)
+ return -ENOMEM;
+
+ ret = gic_get_clocks(dev);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, gic);
+
+ pm_runtime_enable(dev);
+
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0)
+ goto rpm_disable;
+
+ irq = irq_of_parse_and_map(dev->of_node, 0);
+ if (!irq) {
+ ret = -EINVAL;
+ goto rpm_put;
+ }
+
+ ret = gic_of_setup(dev->of_node, &dist_base, &cpu_base, &percpu_offset);
+ if (ret)
+ goto irq_dispose;
+
+ ret = gic_init_bases(gic, -1, dist_base, cpu_base,
+ percpu_offset, &dev->of_node->fwnode,
+ dev->of_node->name);
+ if (ret)
+ goto gic_unmap;
+
+ gic->chip.parent = dev;
+
+ irq_set_chained_handler_and_data(irq, gic_handle_cascade_irq, gic);
+
+ pm_runtime_put(dev);
+
+ dev_info(dev, "GIC IRQ controller registered\n");
+
+ return 0;
+
+gic_unmap:
+ iounmap(dist_base);
+ iounmap(cpu_base);
+irq_dispose:
+ irq_dispose_mapping(irq);
+rpm_put:
+ pm_runtime_put_sync(dev);
+rpm_disable:
+ pm_runtime_disable(dev);
+ pm_clk_destroy(dev);
+
+ return ret;
+}
+
+static const struct dev_pm_ops gic_pm_ops = {
+ SET_RUNTIME_PM_OPS(gic_runtime_suspend,
+ gic_runtime_resume, NULL)
+};
+
+static const struct of_device_id gic_match[] = {
+ { .compatible = "nvidia,tegra210-agic", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, gic_match);
+
+static struct platform_driver gic_driver = {
+ .probe = gic_probe,
+ .driver = {
+ .name = "gic",
+ .of_match_table = gic_match,
+ .pm = &gic_pm_ops,
+ }
+};
+
+builtin_platform_driver(gic_driver);
#endif
#ifdef CONFIG_ACPI
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
