On Wed, 16 Mar 2016, Peter Griffin wrote:
> Hi Lee,
>
> On Tue, 12 Jan 2016, Lee Jones wrote:
>
> > Doing so saves quite a bit of code in the driver.
> >
> > For more information on the 'reserved-memory' bindings see:
> >
> > Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
> >
> > Suggested-by: Suman Anna <s-anna@xxxxxx>
> > Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/stih407-family.dtsi | 46 +++++++++++++++++++++++++++++------
> > 1 file changed, 38 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
> > index 15c20b6..27b8efc 100644
> > --- a/arch/arm/boot/dts/stih407-family.dtsi
> > +++ b/arch/arm/boot/dts/stih407-family.dtsi
> > @@ -15,6 +15,36 @@
> > #address-cells = <1>;
> > #size-cells = <1>;
> >
> > + reserved-memory {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + gp0_reserved: rproc@40000000 {
> > + compatible = "shared-dma-pool";
> > + reg = <0x40000000 0x01000000>;
> > + no-map;
> > + };
> > +
> > + gp1_reserved: rproc@41000000 {
> > + compatible = "shared-dma-pool";
> > + reg = <0x41000000 0x01000000>;
> > + no-map;
> > + };
> > +
> > + audio_reserved: rproc@42000000 {
> > + compatible = "shared-dma-pool";
> > + reg = <0x42000000 0x01000000>;
> > + no-map;
> > + };
> > +
> > + dmu_reserved: rproc@43000000 {
> > + compatible = "shared-dma-pool";
> > + reg = <0x43000000 0x01000000>;
> > + no-map;
> > + };
>
> I don't believe these reserved memory ranges are correct for audio_reserved and dmu_reserved.
>
> For example my vid_firmware-stih407.elf is linked at 0x41c00000 base address and my
> audio_firmware-bd-stih407.elf is linked at 0x40c00000.
>
> So with all the st231 rproc nodes enabled I guess it would still work. But
> currently I think st231_gp0 is reserving the memory region for st231_audio,
> and st231-gp1 is reserving the memory region for st231_dmu.
These addresses are taken from internally tested code. I don't have
access to the LMI layout documentation (if it even exists) so can't
check for myself. Isn't this just DDR anyway? So in theory we can
configure each devices' slice where ever we feel is appropriate? How
is memory allocated to the DMU and Audio drivers? Do you have scripts
which link the aforementioned binaries?
If you think there is an issue, I suggest the best thing to do is ping
Ludovic, since he is the author of the original code.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
