Re: [PATCH v3 2/9] net: arc_emac: add phy reset is optional for device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello.

On 3/14/2016 11:01 AM, Caesar Wang wrote:

This patch adds the following property for arc_emac.

1) phy-reset-gpios:
The phy-reset-gpio is an optional property for arc emac device tree boot.
Change the binding document to match the driver code.

2) phy-reset-duration:
Different boards may require different phy reset duration. Add property
phy-reset-duration for device tree probe, so that the boards that need
a longer reset duration can specify it in their device tree.

Anyway, we can add the above property for arc emac.

Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>

Could you have a look at drivers/net/ethernet/cadence/macb/? It seems to be the only driver which places the PHY's "reset-gpios" prop correctly, into the PHY subnode? I'm currently working on adding support of this prop into phylib...

MBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux