[PATCH v5 0/2] power: reset: support for Atmel alternative Shutdown Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This is a series to add driver for a new Atmel Shutdown Controller. This new IP
is extensible and some features will be added later (see the TODO section).
Its extensible nature led to write a new binding so that wake-up sources can be
described easily.

Changes in v5:
- Instead of the "alternate shdwc" we choose a more specific
  "sama5d2-compatible shdwc" wording. Change file name, in Kconfig, and the
  MAINTAINERS file:
  at91-shdwc.c -> at91-sama5d2_shdwc.c
  "ATMEL AT91 Alternative Shutdown Controller" -> "ATMEL AT91 SAMA5D2-Compatible
  Shutdown Controller"
- fix one indentation mismatch

Changes in v4:
- change property to debounce-delay-us so that we can use a generic property
  and we can have the unit explicitly included it the name according to
  Documentation/devicetree/bindings/property-units.txt.
- move to atmel,wakeup-active-high boolean property instead of a "high", "low"
  string comparison.
- fix warning found by 0-day robot: large integer implicitly truncated to
  unsigned type [-Woverflow]
- move to the property debounce-delay-us
- move to atmel,wakeup-active-high boolean
- add entry in MAINTAINERS file

Changes in v3:
- get and use slow clock and specify its handler in binding
- add the slow clock handle as the IP uses it
- remove useless protection at the beginning of pm_power_off handler
- allow to compile it as a module
- add COMPILE_TEST directive in Kconfig
- update description in file header

Changes in v2:
- add MODULE_DEVICE_TABLE as advised by Sebastian Reichel
- review indentation and braces to correct errors pointed out by checkpatch

Nicolas Ferre (2):
  ARM: dts: at91: shdwc binding: add new shutdown controller
    documentation
  power: reset: at91-shdwc: add new shutdown controller driver

 .../devicetree/bindings/arm/atmel-at91.txt         |  59 +++++
 MAINTAINERS                                        |   5 +
 drivers/power/reset/Kconfig                        |   8 +
 drivers/power/reset/Makefile                       |   1 +
 drivers/power/reset/at91-sama5d2_shdwc.c           | 282 +++++++++++++++++++++
 5 files changed, 355 insertions(+)
 create mode 100644 drivers/power/reset/at91-sama5d2_shdwc.c

-- 
2.1.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux