R-Car Gen2 have two DMA controllers, which are equivalent. Add references to both dmac0 and dmac1 so the driver can fallback to the later if the first one is unavailable. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> Acked-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- arch/arm/boot/dts/r8a7791.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 4d0d7a7..8880e22 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1518,8 +1518,9 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; - dmas = <&dmac0 0x17>, <&dmac0 0x18>; - dma-names = "tx", "rx"; + dmas = <&dmac0 0x17>, <&dmac0 0x18>, + <&dmac1 0x17>, <&dmac1 0x18>; + dma-names = "tx", "rx", "tx", "rx"; power-domains = <&cpg_clocks>; num-cs = <1>; #address-cells = <1>; -- 2.7.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
