[PATCH v3 7/8] ARM: dts: Add exynos3250-artik5 dtsi file for ARTIK5 module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This patch adds the support for Device Tree source for Samsung ARTIK5 module[1]
based on Exynos3250 SoC. The ARTIK5 module includes the follwoing devices:
- Application Processor (Samsung Exynos3250)
- WiFi/BT Combo chip (Broadcom4354)
- PMIC (Samsung S2MPS14)
- eMMC (4GB)
- DRAM LPDDR3 (512MB)
- Connectors pin (60 Pins x 3 set)

Also, this patch adds the ARTIK5 evaluation board[2] dts file which includes
the ARTIK5 module[1] and have the devices such as sound codec, sd card port,
ethernet port, uart port and so on.

[1] https://www.artik.io/hardware/artik-5
[2] http://www.digikey.com/product-search/en?FV=ffecca14

Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
---
 .../bindings/arm/samsung/samsung-boards.txt        |   2 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/exynos3250-artik5-eval.dts       |  26 ++
 arch/arm/boot/dts/exynos3250-artik5.dtsi           | 334 +++++++++++++++++++++
 4 files changed, 363 insertions(+)
 create mode 100644 arch/arm/boot/dts/exynos3250-artik5-eval.dts
 create mode 100644 arch/arm/boot/dts/exynos3250-artik5.dtsi

diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
index 12129c011c8f..f5deace2b380 100644
--- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
@@ -2,6 +2,8 @@
 
 Required root node properties:
     - compatible = should be one or more of the following.
+	- "samsung,artik5"	- for Exynos3250-based Samsung ARTIK5 module.
+	- "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
 	- "samsung,monk"	- for Exynos3250-based Samsung Simband board.
 	- "samsung,rinato"	- for Exynos3250-based Samsung Gear2 board.
 	- "samsung,smdkv310"	- for Exynos4210-based Samsung SMDKV310 eval board.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a4a6d70e8b26..85cd586ea3d2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_DIGICOLOR) += \
 dtb-$(CONFIG_ARCH_EFM32) += \
 	efm32gg-dk3750.dtb
 dtb-$(CONFIG_ARCH_EXYNOS3) += \
+	exynos3250-artik5-eval.dtb \
 	exynos3250-monk.dtb \
 	exynos3250-rinato.dtb
 dtb-$(CONFIG_ARCH_EXYNOS4) += \
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
new file mode 100644
index 000000000000..b476154590a5
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
@@ -0,0 +1,26 @@
+/*
+ * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's ARTIK5 evaluation board
+ * which is based on Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos3250-artik5.dtsi"
+
+/ {
+	model = "Samsung ARTIK5 evaluation board";
+	compatible = "samsung,artik5-eval", "samsung,artik5",
+			"samsung,exynos3250", "samsung,exynos3";
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
new file mode 100644
index 000000000000..130e946f1414
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -0,0 +1,334 @@
+/*
+ * Samsung's Exynos3250 based ARTIK5 module device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's ARTIK5 module which is based on
+ * Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "exynos3250.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	memory {
+		reg = <0x40000000 0x1ff00000>;
+	};
+
+	firmware@0205f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0205f000 0x1000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 500MHz */
+					cooling-device = <&cpu0 5 5>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 8 8>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo7_reg>;
+	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+	assigned-clock-rates = <6000000>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	s2mps14_pmic@66 {
+		compatible = "samsung,s2mps14-pmic";
+		interrupt-parent = <&gpx3>;
+		interrupts = <5 IRQ_TYPE_NONE>;
+		reg = <0x66>;
+
+		s2mps14_osc: clocks {
+			compatible = "samsung,s2mps14-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps14_ap", "unused",
+				"s2mps14_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				/* VDD_ALIVE15x */
+				regulator-name = "VLDO1_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				/* VDDQM176 ~ VDDQM185 */
+				regulator-name = "VLDO2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				/*
+				 * VDD1_E106 ~ VDD1_E111
+				 * DVDD_RTC_AP, DVDD_MMC2_AP
+				 */
+				regulator-name = "VLDO3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				/*  AVDD_PLL1120 ~ AVDD_PLL11201 */
+				regulator-name = "VLDO4_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				/* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
+				regulator-name = "VLDO5_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				/* VDD_USB, VDD10_HSIC */
+				regulator-name = "VLDO6_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				/*
+				 * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
+				 * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
+				 */
+				regulator-name = "VLDO7_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				/* AVDD33_UOTG */
+				regulator-name = "VLDO8_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				/* VDDQ_E86 ~ VDDQ_E105*/
+				regulator-name = "VLDO9_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VLDO10_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo11_reg: LDO11 {
+				/* VDD74 ~ VDD75 */
+				regulator-name = "VLDO11_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo12_reg: LDO12 {
+				/* VDD72 ~ VDD73 */
+				regulator-name = "VLDO12_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VLDO13_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VLDO14_2.7V";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VLDO_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VLDO16_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VLDO17_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo18_reg: LDO18 {
+				/* DVDD_MMC2_AP */
+				regulator-name = "VLDO18_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VLDO19_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VLDO20_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VLDO21_1.25V";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VLDO22_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo23_reg: LDO23 {
+				/* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
+				regulator-name = "VLDO23_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VLDO24_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VLDO25_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				/* VDD_MIF */
+				regulator-name = "VBUCK1_1.0V";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				/* VDD_CPU */
+				regulator-name = "VBUCK2_1.2V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				/* VDD_G3D */
+				regulator-name = "VBUCK3_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VBUCK4_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VBUCK5_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mshc_0 {
+	num-slots = <1>;
+	non-removable;
+	cap-mmc-highspeed;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo12_reg>;
+	clock-frequency = <100000000>;
+	clock-freq-min-max = <400000 100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux