This is w.r.t J6/J6eco: 32clk is pseudo (erratum i856) - clock source. Errata i856 for the AM572x (DRA7xx) points out that the 32.768KHz external crystal is not enabled at power up. Instead the CPU falls back to using an emulation for the 32KHz clock which is SYSCLK1/610. SYSCLK1 is usually 20MHz on boards so far (which gives an emulated frequency of 32.786KHz) Modelling the same in device tree. Signed-off-by: Keerthy <j-keerthy@xxxxxx> --- Errata Document: http://www.ti.com/lit/er/sprz429h/sprz429h.pdf Errata number: i856 Tested the debugfs clock tree nodes on DRA7-EVM. arch/arm/boot/dts/dra7xx-clocks.dtsi | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index 357bede..7f1f892 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -98,12 +98,20 @@ clock-frequency = <32768>; }; - sys_32k_ck: sys_32k_ck { + sys_clk32_crystal_ck: sys_clk32_crystal_ck { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; + sys_clk32_pseudo_ck: sys_clk32_pseudo_ck { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&sys_clkin1>; + clock-mult = <1>; + clock-div = <610>; + }; + virt_12000000_ck: virt_12000000_ck { #clock-cells = <0>; compatible = "fixed-clock"; @@ -2146,4 +2154,12 @@ ti,bit-shift = <0>; reg = <0x558>; }; + + sys_32k_ck: sys_32k_ck { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>; + ti,bit-shift = <8>; + reg = <0x6c4>; + }; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
