On 14.03.2016 17:15, Chanwoo Choi wrote: > On 2016년 03월 14일 15:57, Krzysztof Kozlowski wrote: >> On 14.03.2016 11:04, Chanwoo Choi wrote: >>> From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> >>> >>> This patch adds MSHC (Mobile Storage Host Controller) dt node for Exynos3250 >>> SoC. MSHC is an interface between the system and the eMMC device. >>> >>> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> >>> Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx> >>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx> >>> --- >>> arch/arm/boot/dts/exynos3250-artik5.dtsi | 19 +++++++++++++++++++ >>> 1 file changed, 19 insertions(+) >>> >>> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi >>> index 97d0087efb9f..75b291c10cdc 100644 >>> --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi >>> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi >>> @@ -277,6 +277,25 @@ >>> }; >>> }; >>> >>> +&mshc_0 { >>> + num-slots = <1>; >>> + broken-cd; >>> + non-removable; >> >> Broken or non-removable, not both. > > I'll remove the 'broken-cd' property. > >> >>> + cap-mmc-highspeed; >>> + desc-num = <4>; >>> + card-detect-delay = <200>; >>> + vmmc-supply = <&ldo11_reg>; >> >> Isn't this vqmmc-supply? > > I'll fix it as following by using ldo12_reg: > vmmc-supply = <&ldo12_reg>; Sure, looks good. > >> >> BTW, both MMC0 regulators (ldo11, ldo12) are marked as always-on. Why >> they cannot be controlled by XMMC0CDN (just like on Rinato)? > > I'll fix it like rinato board to handle the ldo11/ldo12 as following: > gpk0-2 is XMMC0CDN pin. Great! Thanks, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html