[PATCH v2 0/2] Add support for SYSCON reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Some SoCs contain reset controls for modules that are memory-mapped to
areas shared with other module configuration settings. This requires
synchronization across all drivers accessing this memory area. This
series adds a generic SYSCON reset driver to allow resets toggled
by bits in memory-mapped registers through SYSCON.

Changes from v1:
 - Reset control information is now described in the reset node, this
   keeps the reset information centralized for easy verification
 - Other small fixups

Andrew F. Davis (2):
  Documentation: dt: reset: Add syscon reset binding
  reset: add a SYSCON based reset driver

 .../devicetree/bindings/reset/syscon-reset.txt     | 114 +++++++++
 drivers/reset/Kconfig                              |  10 +
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-syscon.c                       | 283 +++++++++++++++++++++
 include/dt-bindings/reset/syscon.h                 |  23 ++
 5 files changed, 431 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/syscon-reset.txt
 create mode 100644 drivers/reset/reset-syscon.c
 create mode 100644 include/dt-bindings/reset/syscon.h

-- 
2.7.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux