This is a series to add driver for a new Atmel Shutdown Controller. This new IP
is extensible and some features will be added later (see the TODO section).
Its extensible nature led to write a new binding so that wake-up sources can be
described easily.
Changes in v4:
- change property to debounce-delay-us so that we can use a generic property
and we can have the unit explicitly included it the name according to
Documentation/devicetree/bindings/property-units.txt.
- move to atmel,wakeup-active-high boolean property instead of a "high", "low"
string comparison.
- fix warning found by 0-day robot: large integer implicitly truncated to
unsigned type [-Woverflow]
- add entry in MAINTAINERS file
Changes in v3:
- get and use slow clock and specify its handler in binding
- add the slow clock handle as the IP uses it
- remove useless protection at the beginning of pm_power_off handler
- allow to compile it as a module
- add COMPILE_TEST directive in Kconfig
- update description in file header
Changes in v2:
- add MODULE_DEVICE_TABLE as advised by Sebastian Reichel
- review indentation and braces to correct errors pointed out by checkpatch
Nicolas Ferre (2):
ARM: dts: at91: shdwc binding: add new shutdown controller
documentation
power: reset: at91-shdwc: add new shutdown controller driver
.../devicetree/bindings/arm/atmel-at91.txt | 59 +++++
MAINTAINERS | 5 +
drivers/power/reset/Kconfig | 8 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/at91-shdwc.c | 282 +++++++++++++++++++++
5 files changed, 355 insertions(+)
create mode 100644 drivers/power/reset/at91-shdwc.c
--
2.1.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
