To use self-refresh mode for DDR3 SDRAM memory in LPSTOPx mode, the
hardware need to have pull-ups/downs populated on RESET/CKE line of
the DDR memory. Read the device tree property which indicates whether
a given board has such resistors populated.
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
arch/arm/mach-imx/pm-vf610.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/pm-vf610.c b/arch/arm/mach-imx/pm-vf610.c
index ecc7c9c..3da93e9 100644
--- a/arch/arm/mach-imx/pm-vf610.c
+++ b/arch/arm/mach-imx/pm-vf610.c
@@ -93,6 +93,7 @@
static void __iomem *suspend_ocram_base;
static void (*vf610_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
+static bool has_cke_reset_pulls;
#ifdef DEBUG
static void __iomem *uart_membase;
@@ -382,7 +383,8 @@ static int vf610_pm_enter(suspend_state_t state)
static int vf610_pm_valid(suspend_state_t state)
{
- return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM);
+ return (state == PM_SUSPEND_STANDBY ||
+ (state == PM_SUSPEND_MEM && has_cke_reset_pulls));
}
static const struct platform_suspend_ops vf610_pm_ops = {
@@ -476,6 +478,19 @@ static int __init vf610_suspend_init(const struct vf610_pm_socdata *socdata)
return ret;
#endif
+ node = of_find_compatible_node(NULL, NULL, socdata->ddrmc_compat);
+ if (node) {
+ has_cke_reset_pulls =
+ of_property_read_bool(node, "fsl,has-cke-reset-pulls");
+
+ of_node_put(node);
+ }
+
+ if (has_cke_reset_pulls)
+ pr_info("PM: CKE/RESET pulls available, enable Suspend-to-RAM\n");
+ else
+ pr_info("PM: No CKE/RESET pulls, disable Suspend-to-RAM\n");
+
suspend_set_ops(&vf610_pm_ops);
node = of_find_compatible_node(NULL, NULL, "mmio-sram");
--
2.7.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
