On 2/26/2016 2:10 PM, Xinliang Liu wrote:
Add support for external HDMI bridge.
v6: None.
v5: None.
v4: None.
v3:
- Fix a typo: s/exteranl/external.
v2:
- Remove abtraction layer.
Reviewed-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
Signed-off-by: Xinliang Liu <xinliang.liu@xxxxxxxxxx>
---
drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c | 52 ++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
index f15798b61451..c2c406446513 100644
--- a/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
+++ b/drivers/gpu/drm/hisilicon/kirin/dw_drm_dsi.c
@@ -79,6 +79,7 @@ struct dsi_hw_ctx {
struct dw_dsi {
struct drm_encoder encoder;
+ struct drm_bridge *bridge;
struct mipi_dsi_host host;
struct drm_display_mode cur_mode;
struct dsi_hw_ctx *ctx;
@@ -688,6 +689,25 @@ static int dsi_host_init(struct device *dev, struct dw_dsi *dsi)
return 0;
}
+static int dsi_bridge_init(struct drm_device *dev, struct dw_dsi *dsi)
+{
+ struct drm_encoder *encoder = &dsi->encoder;
+ struct drm_bridge *bridge = dsi->bridge;
+ int ret;
+
+ /* associate the bridge to dsi encoder */
+ encoder->bridge = bridge;
+ bridge->encoder = encoder;
+
+ ret = drm_bridge_attach(dev, bridge);
+ if (ret) {
+ DRM_ERROR("failed to attach external bridge\n");
+ return ret;
+ }
+
+ return 0;
+}
+
static int dsi_bind(struct device *dev, struct device *master, void *data)
{
struct dsi_data *ddata = dev_get_drvdata(dev);
@@ -703,6 +723,10 @@ static int dsi_bind(struct device *dev, struct device *master, void *data)
if (ret)
return ret;
+ ret = dsi_bridge_init(drm_dev, dsi);
+ if (ret)
+ return ret;
+
return 0;
}
@@ -719,8 +743,36 @@ static const struct component_ops dsi_ops = {
static int dsi_parse_dt(struct platform_device *pdev, struct dw_dsi *dsi)
{
struct dsi_hw_ctx *ctx = dsi->ctx;
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *endpoint, *bridge_node;
+ struct drm_bridge *bridge;
struct resource *res;
+ /*
+ * Get the endpoint node. In our case, dsi has one output port1
+ * to which the external HDMI bridge is connected.
+ */
+ endpoint = of_graph_get_endpoint_by_regs(np, 1, -1);
+ if (!endpoint) {
+ DRM_ERROR("no valid endpoint node\n");
+ return -ENODEV;
+ }
+ of_node_put(endpoint);
+
+ bridge_node = of_graph_get_remote_port_parent(endpoint);
+ if (!bridge_node) {
+ DRM_ERROR("no valid bridge node\n");
+ return -ENODEV;
+ }
+ of_node_put(bridge_node);
+
+ bridge = of_drm_find_bridge(bridge_node);
+ if (!bridge) {
+ DRM_INFO("wait for external HDMI bridge driver.\n");
+ return -EPROBE_DEFER;
+ }
+ dsi->bridge = bridge;
+
ctx->pclk = devm_clk_get(&pdev->dev, "pclk");
if (IS_ERR(ctx->pclk)) {
DRM_ERROR("failed to get pclk clock\n");
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
