This series adds Ethernet support on STM32F429 SOC and enable it on Eval board: -Add Ethernet node in SOC file: -Define MII mode pinctrl -use Mixed burst and PBL 8 -Add system config node for glue. -Enable Ethernet for Eval board: -mii mode -connected to a PHY through MDIO. Note, this series follow the series which adds glue and update stmmac driver: https://lkml.org/lkml/2016/2/26/329 Best regards. Alex Alexandre TORGUE (3): ARM: dts: stm32f429: Add system config bank node ARM: dts: stm32f429: Add Ethernet support ARM: dts: stm32f429: Enable Ethernet on Eval board arch/arm/boot/dts/stm32429i-eval.dts | 15 ++++++++++++++ arch/arm/boot/dts/stm32f429.dtsi | 40 ++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html