From: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>
Update the IPMMU DT binding documentation to include the r8a7795 compat
string as well as the "renesas,ipmmu-main" property that on r8a7795 will
be used to describe the topology and the relationship between the various
cache IPMMU instances and the main IPMMU.
Signed-off-by: Magnus Damm <damm+renesas@xxxxxxxxxxxxx>
---
Written against linux-next tag next-20160229
Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt | 15 ++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
--- 0001/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt
+++ work/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt 2016-02-29 23:25:15.540513000 +0900
@@ -7,23 +7,34 @@ connected to the IPMMU through a port ca
Required Properties:
- - compatible: Must contain SoC-specific and generic entries from below.
+ - compatible: Must contain SoC-specific and generic entry below in case
+ the device is compatible with the R-Car Gen2 VMSA-compatible IPMMU.
- "renesas,ipmmu-r8a73a4" for the R8A73A4 (R-Mobile APE6) IPMMU.
- "renesas,ipmmu-r8a7790" for the R8A7790 (R-Car H2) IPMMU.
- "renesas,ipmmu-r8a7791" for the R8A7791 (R-Car M2-W) IPMMU.
- "renesas,ipmmu-r8a7793" for the R8A7793 (R-Car M2-N) IPMMU.
- "renesas,ipmmu-r8a7794" for the R8A7794 (R-Car E2) IPMMU.
+ - "renesas,ipmmu-r8a7795" for the R8A7795 (R-Car H3) IPMMU.
- "renesas,ipmmu-vmsa" for generic R-Car Gen2 VMSA-compatible IPMMU.
- reg: Base address and size of the IPMMU registers.
- interrupts: Specifiers for the MMU fault interrupts. For instances that
support secure mode two interrupts must be specified, for non-secure and
secure mode, in that order. For instances that don't support secure mode a
- single interrupt must be specified.
+ single interrupt must be specified. Not required for cache IPMMUs.
- #iommu-cells: Must be 1.
+Optional properties:
+
+ - renesas,ipmmu-main: reference to the main IPMMU instance in two cells.
+ The first cell is a phandle to the main IPMMU and the second cell is
+ the interrupt bit number associated with the particular cache IPMMU device.
+ The interrupt bit number needs to match the main IPMMU IMSSTR register.
+ Only used by cache IPMMU instances.
+
+
Each bus master connected to an IPMMU must reference the IPMMU in its device
node with the following property:
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
