Re: [PATCH 0/4] bcm2835 SDHOST controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




> On 27.02.2016, at 00:05, Eric Anholt <eric@xxxxxxxxxx> wrote:
> 
> Here's a series to enable the SDHOST controller.  It gives us better
> performance than our old sdhci-bcm2835.c.  The downstream Raspberry Pi
> kernel appears to be using this controller by default at this point.
> 
> I've tried to do some testing on it (mounting filesystem,
> reading/writing files, speed tests), but I'm not sure what a good
> testing regimen for storage drivers would be.
> 
> Eric Anholt (4):
>  dt-bindings: Add binding for brcm,bcm2835-sdhost.
>  mmc: bcm2835-sdhost: Add new driver for the internal SD controller.
>  ARM: bcm2835: Include SDHOST in the device tree.
>  ARM: bcm2835: Enable SDHOST by default.

This patchset misses defconfig changes to enable
the new sdhost driver.

So we end up with a default kernel
without the sdhost driver compiled in
but with sdhost enabled in the default device-tree (patch4)
resulting in a system that does not boot.

Thanks,
	Martin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux