Will send out v4 soon, with minor changes. Le dimanche 28 février 2016 à 11:20 +0100, Paul Kocialkowski a écrit : > This series requires lp872x regulator patches from the regulator tree[0] to > work > at run-time but can be applied as-is. > > Changes since v2: > * Add USB OTG support > * Add TWL4030 keypad support > * Drop references to P970 since other devices (e.g. KU5900) are supported too > > Changes since v1: > * Remove lp872x patches that were accepted already from the series > * Explain why removing the invalid DVS GPIO warning is enough > * Update copyright notice on omap3-sniper.dts > * Rename the devicetree property for the enable GPIO to enable-gpios > * Rename function to enable GPIO to lp872x_hw_enable > * Add enable delays after requesting the enable GPIO > * Use IOPAD macros for pinmux description > * Mux the dp3t uart selection pins to gpio > * Restrict not-reset gpio controllers to only avoid reset when needed > > This series introduces support for the LG Optimus Black, as described in the > patch adding devicetree support for the device. > > In order to power the external mmc (mmc1), the lp872x regulator is used. > Its code had to be improved a bit to work on the device. > > Note that the patch adding devicetree support for the device requires the > changes applied to the lp872x regulator, so all this is sent in one series > despite the fact they're different parts of the code. > > [0]: https://git.kernel.org/cgit/linux/kernel/git/broonie/regulator.git/log/?h > =topic/lp872x > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html
Attachment:
signature.asc
Description: This is a digitally signed message part
