It's disabled by default, and will be enabled by a particular board's DT. The DMA channels are also currently left out, because our DMA engine support doesn't yet include slave SG, and there doesn't appear to be a clean way to include "does slave SG" in the channel request/config process. Signed-off-by: Eric Anholt <eric@xxxxxxxxxx> --- arch/arm/boot/dts/bcm283x.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 597a78f..7b2721b 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -366,6 +366,14 @@ status = "disabled"; }; + sdhost: sdhost@7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + status = "disabled"; + }; + pwm: pwm@7e20c000 { compatible = "brcm,bcm2835-pwm"; reg = <0x7e20c000 0x28>; -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html