Add three files. One describes the actual frame engine, the other two describe fast ethernet and gigabit switches bindings. Signed-off-by: John Crispin <blogic@xxxxxxxxxxx> Signed-off-by: Felix Fietkau <nbd@xxxxxxxxxxx> Signed-off-by: Michael Lee <igvtee@xxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx --- .../devicetree/bindings/net/mediatek-net-esw.txt | 25 +++++ .../devicetree/bindings/net/mediatek-net-gsw.txt | 48 +++++++++ .../devicetree/bindings/net/mediatek-net.txt | 113 ++++++++++++++++++++ 3 files changed, 186 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/mediatek-net-esw.txt create mode 100644 Documentation/devicetree/bindings/net/mediatek-net-gsw.txt create mode 100644 Documentation/devicetree/bindings/net/mediatek-net.txt diff --git a/Documentation/devicetree/bindings/net/mediatek-net-esw.txt b/Documentation/devicetree/bindings/net/mediatek-net-esw.txt new file mode 100644 index 0000000..84c51a0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-net-esw.txt @@ -0,0 +1,25 @@ +Ralink Fast Ethernet Embedded Switch +==================================== + +The ralink fast ethernet embedded switch can be found on Ralink and Mediatek +SoCs (RT3x5x, RT5350, MT76x8). + +Required properties: +- compatible: Should be "ralink,rt3050-esw" +- reg: Address and length of the register set for the device +- interrupts: Should contain the embedded switches interrupt + +Optional properties: +- mediatek,led_polarity: override the active high/low settings of the leds +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device + +Example: + +esw@10110000 { + compatible = "ralink,rt3050-esw"; + reg = <0x10110000 8000>; + + interrupt-parent = <&intc>; + interrupts = <17>; +}; diff --git a/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt b/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt new file mode 100644 index 0000000..596b385 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt @@ -0,0 +1,48 @@ +Mediatek Gigabit Switch +======================= + +The mediatek gigabit switch can be found on Mediatek SoCs. + +Required properties: +- compatible: Should be "mediatek,mt7620-gsw", "mediatek,mt7621-gsw", + "mediatek,mt7623-gsw" +- reg: Address and length of the register set for the device +- interrupts: Should contain the gigabit switches interrupt + + +Additional required properties for ARM based SoCs: +- mediatek,reset-pin: phandle describing the reset GPIO +- clocks: the clocks used by the switch +- clock-names: the names of the clocks listed in the clocks property + these should be "trgpll", "esw", "gp2", "gp1" +- mt7530-supply: the phandle of the regulator used to power the switch +- mediatek,pctl-regmap: phandle to the port control regmap. this is used to + setup the drive current + + +Optional properties: +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device + +Example: + +gsw: switch@1b100000 { + compatible = "mediatek,mt7623-gsw"; + reg = <0 0x1b110000 0 0x300000>; + + interrupt-parent = <&pio>; + interrupts = <168 IRQ_TYPE_EDGE_RISING>; + + clocks = <&apmixedsys CLK_APMIXED_TRGPLL>, + <ðsys CLK_ETHSYS_ESW>, + <ðsys CLK_ETHSYS_GP2>, + <ðsys CLK_ETHSYS_GP1>; + clock-names = "trgpll", "esw", "gp2", "gp1"; + + mt7530-supply = <&mt6323_vpa_reg>; + + mediatek,pctl-regmap = <&syscfg_pctl_a>; + mediatek,reset-pin = <&pio 15 0>; + + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt new file mode 100644 index 0000000..f8c5747 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -0,0 +1,113 @@ +iMEdiatek Frame Engine Ethernet controller +======================================= + +The frame engine ethernet controller can be found on Ralink and Mediatek SoCs +(RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8). + +Depending on the SoC, there is a number of ports connected to the CPU port +directly and/or via a (gigabit-)switch. Newer gigabit SoCs can support +a dual MAC setup. + +* Ethernet controller node + +Required properties: +- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth", + "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth", + "mediatek,mt7620-eth", "mediatek,mt7621-eth", "mediatek,mt7623-eth" +- reg: Address and length of the register set for the device +- interrupts: Should contain the frame engines interrupt +- mediatek,ethsys: phandle to the syscon node that handles the port setup + +Required properties for ARM based SoCs: +- clocks: the clock used by the core +- clock-names: the names of the clock listed in the clocks property +- power-domains: phandle the to power domain that the ethernet is part of + +Optional properties: +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- mediatek,switch : phandle pointing at the device node of the switch device + + +* Ethernet port node for MT7620 + +We need to define which physical port is wired and how it should be setup. + +Required properties: +- compatible: Should be "mediatek,eth-port" +- reg: The number of the physical port +- phy-handle: reference to the node describing the phy + + +* Ethernet MAC node - dual MAC SoCs only + +Required properties: +- compatible: Should be "mediatek,eth-mac" +- reg: The number of the MAC + + +Example for singel MAC SoC: + +mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; +}; + +eth: ethernet@10100000 { + compatible = "mediatek,mt7620-eth"; + reg = <0x10100000 10000>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + mediatek,switch = <&gsw>; + + port@4 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy4>; + }; +}; + + +Example for dual MAC SoC: + +eth: ethernet@1b100000 { + compatible = "mediatek,mt7623-eth"; + reg = <0 0x1b100000 0 0x10000>; + + clocks = <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "ethif"; + + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + + mediatek,ethsys = <ðsys>; + mediatek,switch = <&gsw>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + gmac1: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + + status = "okay"; + }; + + gmac2: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + + status = "okay"; + }; +}; -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html