Add documentation for the generic OMAP DES crypto modul describing the device tree bindings. Reviewed-by: Mark Rutland <mark.rutland@xxxxxxx> Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> Signed-off-by: Joel Fernandes <joelf@xxxxxx> --- v2 changes: Update documentation for clocks, clock-names and dma-names. .../devicetree/bindings/crypto/omap-des.txt | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) create mode 100644 Documentation/devicetree/bindings/crypto/omap-des.txt diff --git a/Documentation/devicetree/bindings/crypto/omap-des.txt b/Documentation/devicetree/bindings/crypto/omap-des.txt new file mode 100644 index 0000000..e8c63bf --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/omap-des.txt @@ -0,0 +1,30 @@ +OMAP SoC DES crypto Module + +Required properties: + +- compatible : Should contain "ti,omap4-des" +- ti,hwmods: Name of the hwmod associated with the DES module +- reg : Offset and length of the register set for the module +- interrupts : the interrupt-specifier for the DES module +- clocks : A phandle to the functional clock node of the DES module + corresponding to each entry in clock-names +- clock-names : Name of the functional clock, should be "fck" + +Optional properties: +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt + Each entry corresponds to an entry in dma-names +- dma-names: DMA request names should include "tx" and "rx" if present + +Example: + /* DRA7xx SoC */ + des: des@480a5000 { + compatible = "ti,omap4-des"; + ti,hwmods = "des"; + reg = <0x480a5000 0xa0>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 117>, <&sdma 116>; + dma-names = "tx", "rx"; + clocks = <&l3_iclk_div>; + clock-names = "fck"; + }; -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html