Re: [PATCH v3 1/2] ehci-platform: Add support for controllers with multiple reset lines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On 24/02/16 13:15, Hans de Goede wrote:
> From: Reinder de Haan <patchesrdh@xxxxxxxxx>
> 
> At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
> reset lines, the controller will not initialize while the reset for
> its companion is still asserted, which means we need to de-assert
> 2 resets for the controller to work.
> 
> Signed-off-by: Reinder de Haan <patchesrdh@xxxxxxxxx>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> Changes in v2:
> -Use the new reset_control_[de]assert_shared reset-controller functions
> Changes in v3:
> -Adjust for changes to shared-reset reset-controller functions
> ---
>  Documentation/devicetree/bindings/usb/usb-ehci.txt |  2 +-
>  drivers/usb/host/ehci-platform.c                   | 41 ++++++++++++----------
>  2 files changed, 24 insertions(+), 19 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> index a12d601..0701812 100644
> --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> @@ -18,7 +18,7 @@ Optional properties:
>   - clocks : a list of phandle + clock specifier pairs
>   - phys : phandle + phy specifier pair
>   - phy-names : "usb"
> - - resets : phandle + reset specifier pair
> + - resets : a list of phandle + reset specifier pairs
>  
>  Example (Sequoia 440EPx):
>      ehci@e0000300 {
> diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
> index bd7082f2..3f195ba 100644
> --- a/drivers/usb/host/ehci-platform.c
> +++ b/drivers/usb/host/ehci-platform.c
> @@ -39,11 +39,12 @@
>  
>  #define DRIVER_DESC "EHCI generic platform driver"
>  #define EHCI_MAX_CLKS 3
> +#define EHCI_MAX_RESETS 2
>  #define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv)
>  
>  struct ehci_platform_priv {
>  	struct clk *clks[EHCI_MAX_CLKS];
> -	struct reset_control *rst;
> +	struct reset_control *resets[EHCI_MAX_RESETS];
>  	struct phy **phys;
>  	int num_phys;
>  	bool reset_on_resume;
> @@ -149,7 +150,7 @@ static int ehci_platform_probe(struct platform_device *dev)
>  	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
>  	struct ehci_platform_priv *priv;
>  	struct ehci_hcd *ehci;
> -	int err, irq, phy_num, clk = 0;
> +	int err, irq, phy_num, clk = 0, rst = 0;
>  
>  	if (usb_disabled())
>  		return -ENODEV;
> @@ -232,18 +233,22 @@ static int ehci_platform_probe(struct platform_device *dev)
>  				break;
>  			}
>  		}
> -	}
>  
> -	priv->rst = devm_reset_control_get_optional(&dev->dev, NULL);
> -	if (IS_ERR(priv->rst)) {
> -		err = PTR_ERR(priv->rst);
> -		if (err == -EPROBE_DEFER)
> -			goto err_put_clks;
> -		priv->rst = NULL;
> -	} else {
> -		err = reset_control_deassert(priv->rst);
> -		if (err)
> -			goto err_put_clks;
> +		for (rst = 0; rst < EHCI_MAX_RESETS; rst++) {
> +			priv->resets[rst] =
> +				devm_reset_control_get_shared_by_index(
> +								&dev->dev, rst);
> +			if (IS_ERR(priv->resets[rst])) {
> +				err = PTR_ERR(priv->resets[rst]);
> +				if (err == -EPROBE_DEFER)
> +					goto err_reset;
> +				priv->resets[rst] = NULL;
> +				break;
> +			}
> +			err = reset_control_deassert(priv->resets[rst]);
> +			if (err)
> +				goto err_reset;
> +		}

Why is this code within "if (dev->of.node)" ?
Previous code looked like it worked for non-DT boots as well.

>  	}
>  
>  	if (pdata->big_endian_desc)
> @@ -300,8 +305,8 @@ err_power:
>  	if (pdata->power_off)
>  		pdata->power_off(dev);
>  err_reset:
> -	if (priv->rst)
> -		reset_control_assert(priv->rst);
> +	while (--rst >= 0)
> +		reset_control_assert(priv->resets[rst]);
>  err_put_clks:
>  	while (--clk >= 0)
>  		clk_put(priv->clks[clk]);
> @@ -319,15 +324,15 @@ static int ehci_platform_remove(struct platform_device *dev)
>  	struct usb_hcd *hcd = platform_get_drvdata(dev);
>  	struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
>  	struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
> -	int clk;
> +	int clk, rst;
>  
>  	usb_remove_hcd(hcd);
>  
>  	if (pdata->power_off)
>  		pdata->power_off(dev);
>  
> -	if (priv->rst)
> -		reset_control_assert(priv->rst);
> +	for (rst = 0; rst < EHCI_MAX_RESETS && priv->resets[rst]; rst++)
> +		reset_control_assert(priv->resets[rst]);
>  
>  	for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++)
>  		clk_put(priv->clks[clk]);
> 

cheers,
-roger
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux