This board has a MAX3355 chip. However, we cannot use the extcon/max3355 driver because the ID pin doesn't connect to a gpio pin (in other words, it connects to the SoC specific pin). And, the phy-rcar-gen3-usb2 driver cannot handle such a chip for now. So, this patch enables usb2_phy of channel 1 and 2. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> --- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 1af6757..e415535 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -188,6 +188,16 @@ "audio_clkout_a", "audio_clkout3_a"; renesas,function = "audio_clk"; }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; + + usb2_pins: usb2 { + renesas,groups = "usb2"; + renesas,function = "usb2"; + }; }; &scif1 { @@ -348,3 +358,17 @@ &xhci0 { status = "okay"; }; + +&usb2_phy1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb2_phy2 { + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html