Re: [PATCH v3 05/10] serial: mps2-uart: add support for early console

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 16/02/16 13:09, Vladimir Murzin wrote:
>>> +EARLYCON_DECLARE(mps2, mps2_early_console_setup);
>>> >> +OF_EARLYCON_DECLARE(mps2, "arm,mps2-uart", mps2_early_console_setup);
>> > 
>> > IIRC Peter Hurley mentioned you don't need to put both anymore, OF_
>> > one is enough.
>> > 
> I've just tried with OF_ only and seems it works fine. Thanks for
> pointing at it!
> 

..and the reason for that was that I had stdout pointing at uart node.
Now, while testing v4 I end-up with configuration:

1) no EARLYCON_DECLARE in mps2-uart.c
2) stdout not set
3) cmdline has "earlycon=mps2,0x40004000 console=/dev/ttyMPS"

and I don't see bootconsole, but if I avoid 1) everything works fine.
So, I'd leave EARLYCON_DECLARE in this patch.

Cheers
Vladimir
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux