Re: [PATCH v11 10/14] clk: mediatek: make dpi0_sel propagate rate changes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Quoting Philipp Zabel (2016-02-17 03:28:50)
> This mux is supposed to select a fitting divider after the PLL
> is already set to the correct rate.
> 
> Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> Acked-by: James Liao <jamesjj.liao@xxxxxxxxxxxx>

Looks good to me.

Regards,
Mike

> ---
> Changes since v10:
>  - Add comments about MUX_GATE rate change propagation
> ---
>  drivers/clk/mediatek/clk-mt8173.c |  6 +++++-
>  drivers/clk/mediatek/clk-mtk.h    | 15 +++++++++++++--
>  2 files changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/mediatek/clk-mt8173.c b/drivers/clk/mediatek/clk-mt8173.c
> index 227e356..85c0bfc 100644
> --- a/drivers/clk/mediatek/clk-mt8173.c
> +++ b/drivers/clk/mediatek/clk-mt8173.c
> @@ -558,7 +558,11 @@ static const struct mtk_composite top_muxes[] __initconst = {
>         MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents, 0x0090, 16, 2, 23),
>         MUX_GATE(CLK_TOP_VENC_LT_SEL, "venclt_sel", venc_lt_parents, 0x0090, 24, 4, 31),
>         /* CLK_CFG_6 */
> -       MUX_GATE(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7),
> +       /*
> +        * The dpi0_sel clock should not propagate rate changes to its parent
> +        * clock so the dpi driver can have full control over PLL and divider.
> +        */
> +       MUX_GATE_FLAGS(CLK_TOP_DPI0_SEL, "dpi0_sel", dpi0_parents, 0x00a0, 0, 3, 7, 0),
>         MUX_GATE(CLK_TOP_IRDA_SEL, "irda_sel", irda_parents, 0x00a0, 8, 2, 15),
>         MUX_GATE(CLK_TOP_CCI400_SEL, "cci400_sel", cci400_parents, 0x00a0, 16, 3, 23),
>         MUX_GATE(CLK_TOP_AUD_1_SEL, "aud_1_sel", aud_1_parents, 0x00a0, 24, 2, 31),
> diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> index 32d2e45..9f24fcf 100644
> --- a/drivers/clk/mediatek/clk-mtk.h
> +++ b/drivers/clk/mediatek/clk-mtk.h
> @@ -83,7 +83,11 @@ struct mtk_composite {
>         signed char num_parents;
>  };
>  
> -#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate) {  \
> +/*
> + * In case the rate change propagation to parent clocks is undesirable,
> + * this macro allows to specify the clock flags manually.
> + */
> +#define MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, _flags) {    \
>                 .id = _id,                                              \
>                 .name = _name,                                          \
>                 .mux_reg = _reg,                                        \
> @@ -94,9 +98,16 @@ struct mtk_composite {
>                 .divider_shift = -1,                                    \
>                 .parent_names = _parents,                               \
>                 .num_parents = ARRAY_SIZE(_parents),                    \
> -               .flags = CLK_SET_RATE_PARENT,                           \
> +               .flags = _flags,                                        \
>         }
>  
> +/*
> + * Unless necessary, all MUX_GATE clocks propagate rate changes to their
> + * parent clock by default.
> + */
> +#define MUX_GATE(_id, _name, _parents, _reg, _shift, _width, _gate)    \
> +       MUX_GATE_FLAGS(_id, _name, _parents, _reg, _shift, _width, _gate, CLK_SET_RATE_PARENT)
> +
>  #define MUX(_id, _name, _parents, _reg, _shift, _width) {              \
>                 .id = _id,                                              \
>                 .name = _name,                                          \
> -- 
> 2.7.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux