[PATCH 1/2] ARM: meson: Adding support to retrieve serial and SoC revision

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




This path adds support to get the revision and the serial of the running
SoC, on Meson8. On these plaforms, these informations can be found into
CBUS registers. To do so, we instanciate a syscon register, then create
a soc_device, and finally we expose everything to the system.

Signed-off-by: Romain Perier <romain.perier@xxxxxxxxx>
---
 arch/arm/mach-meson/meson.c | 55 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c
index 4e23571..2816e30 100644
--- a/arch/arm/mach-meson/meson.c
+++ b/arch/arm/mach-meson/meson.c
@@ -13,8 +13,16 @@
  *
  */
 
+#include <linux/of_address.h>
 #include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
 #include <asm/mach/arch.h>
+#include <asm/system_info.h>
+
+#define MESON_REVISION_REG (0x45c)
 
 static const char * const meson_common_board_compat[] = {
 	"amlogic,meson6",
@@ -23,7 +31,54 @@ static const char * const meson_common_board_compat[] = {
 	NULL,
 };
 
+static void __init meson_init_machine(void)
+{
+	struct soc_device_attribute *soc_dev_attr;
+	struct soc_device *soc_dev;
+	struct regmap *hwrev;
+	unsigned int val;
+	int ret;
+
+	hwrev = syscon_regmap_lookup_by_compatible("amlogic,meson8b-hwrev");
+	if (IS_ERR(hwrev)) {
+		pr_err("hwrev node not found\n");
+		return;
+	}
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return;
+	ret = regmap_read(hwrev, 0, &val);
+	if (ret < 0) {
+		pr_err("Could not get SoC id\n");
+		return;
+	}
+	system_serial_high = val << 24;
+
+	ret = regmap_read(hwrev, MESON_REVISION_REG, &val);
+	if (ret < 0) {
+		pr_err("Could not get SoC revision\n");
+		return;
+	}
+	system_rev = val == 0x11111111 ? 0xA : 0xB;
+
+	soc_dev_attr->family = "Amlogic Meson";
+	soc_dev_attr->revision = kasprintf(GFP_KERNEL, "0x%x", system_rev);
+	soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x", system_serial_high);
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		pr_err("Could not register soc device\n");
+		kfree(soc_dev_attr);
+		return;
+	}
+
+	pr_info("Amlogic Meson SoC Rev%X (%X:%X)\n", system_rev, system_serial_high, system_rev);
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
+}
+
 DT_MACHINE_START(MESON, "Amlogic Meson platform")
+	.init_machine	= meson_init_machine,
 	.dt_compat	= meson_common_board_compat,
 	.l2c_aux_val	= 0,
 	.l2c_aux_mask	= ~0,
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux