Signed-off-by: Sean Nyekjaer <sean.nyekjaer@xxxxxxxxx>
---
Changes since v2:
- Removed defines, alot easier to read :-)
.../devicetree/bindings/iio/dac/ad5755.txt | 94 ++++++++++++++++++++++
1 file changed, 94 insertions(+)
diff --git a/Documentation/devicetree/bindings/iio/dac/ad5755.txt b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
index 4c91583..751204b 100644
--- a/Documentation/devicetree/bindings/iio/dac/ad5755.txt
+++ b/Documentation/devicetree/bindings/iio/dac/ad5755.txt
@@ -15,10 +15,104 @@ Recommended properties:
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
+Optional properties:
+See include/dt-bindings/iio/ad5755.h
+ - adi,ext_dc_dc_compenstation_resistor: boolean set if the hardware have an
+ external resistor and thereby bypasses
+ the internal compensation resistor.
+ - adi,dc_dc_phase:
+ Valid values for DC DC Phase control is:
+ 0: All dc-to-dc converters clock on the same edge.
+ 1: Channel A and Channel B clock on the same edge,
+ Channel C and Channel D clock on opposite edges.
+ 2: Channel A and Channel C clock on the same edge,
+ Channel B and Channel D clock on opposite edges.
+ 3: Channel A, Channel B, Channel C, and Channel D
+ clock 90 degrees out of phase from each other.
+ - adi,dc_dc_freq:
+ Valid values for DC DC frequency is:
+ 0: 250 kHz.
+ 1: 410 kHz.
+ 2: 650 kHz.
+ - adi,dc_dc_maxv:
+ Valid values for the maximum allowed Vboost voltage supplied by
+ the dc-to-dc converter is:
+ 0: 23 V.
+ 1: 24.5 V.
+ 2: 27 V.
+ 3: 29.5 V.
+
+Optional for every channel:
+ - adi,mode:
+ Valid values for DAC modes is:
+ 0: 0 V to 5 V voltage range.
+ 1: 0 V to 10 V voltage range.
+ 2: Plus minus 5 V voltage range.
+ 3: Plus minus 10 V voltage range.
+ 4: 4 mA to 20 mA current range.
+ 5: 0 mA to 20 mA current range.
+ 6: 0 mA to 24 mA current range.
+ - adi,ext_current_sense_resistor: boolean set if the hardware a external
+ current sense resistor.
+ - adi,enable_voltage_overrange: boolean enable voltage overrange
+ - adi,slew: Array of slewrate settings should contain 3 fields:
+ 1: Should be either 0 or 1 in order to enable or disable slewrate.
+ 2: Slew rate settings:
+ Valid values for the slew rate update frequency:
+ 0: 64 kHz
+ 1: 32 kHz
+ 2: 16 kHz
+ 3: 8 kHz
+ 4: 4 kHz
+ 5: 2 kHz
+ 6: 1 kHz
+ 7: 500 Hz
+ 8: 250 Hz
+ 9: 125 Hz
+ 10: 64 Hz
+ 11: 32 Hz
+ 12: 16 Hz
+ 13: 8 Hz
+ 14: 4 Hz
+ 15: 0.5 Hz
+ 3: Slew step size:
+ Valid values for the step size LSBs:
+ 0: 1
+ 1: 2
+ 2: 4
+ 3: 16
+ 4: 32
+ 5: 64
+ 6: 128
+ 7: 256
+
Example:
dac@0 {
compatible = "adi,ad5755";
reg = <0>;
spi-max-frequency = <1000000>;
spi-cpha;
+ adi,dc_dc_phase = <0>;
+ adi,dc_dc_freq = <1>;
+ adi,dc_dc_maxv = <0>;
+ channel@0 {
+ adi,mode = <4>;
+ adi,ext_current_sense_resistor;
+ adi,slew = <0 0 0>;
+ };
+ channel@1 {
+ adi,mode = <4>;
+ adi,ext_current_sense_resistor;
+ adi,slew = <0 0 0>;
+ };
+ channel@2 {
+ adi,mode = <4>;
+ adi,ext_current_sense_resistor;
+ adi,slew = <0 0 0>;
+ };
+ channel@3 {
+ adi,mode = <4>;
+ adi,ext_current_sense_resistor;
+ adi,slew = <0 0 0>;
+ };
};
--
2.7.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
