Hi
Ping, it seems inno hdmi driver is ready, So I'd like to merge it into
drm/rockchip if there is no doubt these days.
Thanks.
Mark
On 2016年01月29日 14:42, Yakir Yang wrote:
Here are a brief introduction to Innosilicon HDMI IP:
- Support HDMI 1.4a, HDCP 1.2 and DVI 1.0 standard compliant transmitter
- Support HDMI1.4 a/b 3D function defined in HDMI 1.4 a/b spec
- Digital video interface supports a pixel size of 24, 30, 36, 48bits color depth in RGB
- S/PDIF output supports PCM, Dolby Digital, DTS digital audio transmission
(32-192kHz Fs) using IEC60958 and IEC 61937
- The EDID and CEC function are also supported by Innosilicon HDMI Transmitter Controlle
Changes in v8:
- Don't check whether encoder output format is RGB colorspace, cause driver
default configure the output colorspace to RGB. (ZhengYang)
- Correct the check condition in inno_hdmi_config_video_csc() (ZhengYang)
- if (data->enc_out_format == data->enc_out_format) {
+ if (data->enc_in_format == data->enc_out_format) {
Changes in v7:
- Correct the module licnese statement (Paul)
- MODULE_LICENSE("GPL");
+ MODULE_LICENSE("GPLv2");
- Start indentation with tabs and fix the misspell in Kconfig (Paul)
- Carry the lost device-binding document (Heiko)
Changes in v6:
- Rebase the Makefile/Kconfig files which add by Chris's rockchip-mipi driver (Caeser)
Changes in v5:
- Use hdmi_infoframe helper functions to packed the infoframe (Russell)
- Remove the unused double wait_for_completion_timeout for ddc transfer (Russell)
- Remove the unused local variable in "inno_hdmi_i2c_write()" function (Russell)
Changes in v4:
- Modify the commit title "drm/rockchip: hdmi: ..." (Mark)
- Correct the "DKMS" to "DPMS" (Mark)
- Fix over 80 characters problems (Mark)
- Remove encoder .prepare/.commit helper functions, and move the vop mode
configure function into encoder .enable helper functions. (Mark)
Changes in v3:
- Use encoder enable/disable function, and remove the encoder DPMS function
- Keep HDMI PLL power on in standby mode
Changes in v2:
- Using DRM atomic helper functions for connector init (Mark)
- Remove "hdmi->connector.encoder = encoder;" (Mark)
- Add the Acked-by tags from Rob
- Correct the misspell "rk3036-dw-hdmi" (Heiko)
Yakir Yang (2):
drm/rockchip: hdmi: add Innosilicon HDMI support
dt-bindings: add document for Innosilicon HDMI on Rockchip platform
.../display/rockchip/inno_hdmi-rockchip.txt | 50 ++
drivers/gpu/drm/rockchip/Kconfig | 8 +
drivers/gpu/drm/rockchip/Makefile | 1 +
drivers/gpu/drm/rockchip/inno_hdmi.c | 939 +++++++++++++++++++++
drivers/gpu/drm/rockchip/inno_hdmi.h | 362 ++++++++
5 files changed, 1360 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.c
create mode 100644 drivers/gpu/drm/rockchip/inno_hdmi.h
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
