Add an entry for the hardware monitoring MCU
Signed-off-by: Adam Baker <linux@xxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/kirkwood-nsa320.dts | 13 +++++++++++--
1 file changed, 11 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts
index 24f686d..2a935e9 100644
--- a/arch/arm/boot/dts/kirkwood-nsa320.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa320.dts
@@ -193,10 +193,19 @@
};
};
+ hwmon {
+ compatible = "zyxel,nsa320-mcu";
+ pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>;
+ pinctrl-names = "default";
+
+ data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+ };
+
/* The following pins are currently not assigned to a driver,
some of them should be configured as inputs.
- pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act
- &pmx_htp &pmx_vid_b1
+ pinctrl-0 = <&pmx_htp &pmx_vid_b1
&pmx_power_resume_data &pmx_power_resume_clk>; */
};
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
