The device is configured to generate an active-low interrupt signal that is automatically deasserted without requiring any action from the host. Configure the IRQ to trigger on falling edge. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/sh73a0-kzm9g-reference.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 605f6c6..12fdfaa 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -83,7 +83,7 @@ reg = <0x10000000 0x100>; phy-mode = "mii"; interrupt-parent = <&irqpin0>; - interrupts = <3 IRQ_TYPE_NONE>; /* active low */ + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; smsc,irq-push-pull; smsc,save-mac-address; -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html