On Tue, 9 Feb 2016 11:13:47 +0300
Antony Pavlov <antonynpavlov@xxxxxxxxx> wrote:
> This driver can be easely upgraded for other Atheros
> SoCs (e.g. AR724X/AR913X) support.
>
> Signed-off-by: Antony Pavlov <antonynpavlov@xxxxxxxxx>
> Cc: Alban Bedel <albeu@xxxxxxx>
> Cc: Michael Turquette <mturquette@xxxxxxxxxxxx>
> Cc: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Paul Burton <paul.burton@xxxxxxxxxx>
> Cc: linux-clk@xxxxxxxxxxxxxxx
> Cc: linux-mips@xxxxxxxxxxxxxx
> Cc: devicetree@xxxxxxxxxxxxxxx
> ---
> drivers/clk/Makefile | 1 +
> drivers/clk/clk-ath79.c | 354 ++++++++++++++++++++++++++++++++++
> include/dt-bindings/clock/ath79-clk.h | 22 +++
> 3 files changed, 377 insertions(+)
>
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index b038e36..d7ad50e 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -18,6 +18,7 @@ endif
> # hardware specific clock types
> # please keep this section sorted lexicographically by file/directory path name
> obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
> +obj-$(CONFIG_ATH79) += clk-ath79.o
> obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
> obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
> obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
> diff --git a/drivers/clk/clk-ath79.c b/drivers/clk/clk-ath79.c
> new file mode 100644
> index 0000000..e899d31
> --- /dev/null
> +++ b/drivers/clk/clk-ath79.c
> @@ -0,0 +1,354 @@
> +/*
> + * Clock driver for Atheros AR933X SoCs
> + *
> + * Copyright (C) 2016 Antony Pavlov <antonynpavlov@xxxxxxxxx>
> + *
> + * This driver is based on Ingenic CGU linux driver by Paul Burton
> + * and AR9331 barebox driver by Antony Pavlov.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/clkdev.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +
> +#include <dt-bindings/clock/ath79-clk.h>
> +
> +#include "asm/mach-ath79/ar71xx_regs.h"
This header shouldn't be used in new code, just defines the few
registers needed here. Not using this header allow the driver
to be built in compile test which increase test coverage.
> +struct ath79_pll_info {
> + u32 div_shift;
> + u32 div_mask;
> +};
> +
> +struct ath79_cblk;
> +
> +/**
> + * struct ath79_clk_info - information about a clock
> + * @name: name of the clock
> + * @type: a bitmask formed from ATH79_CLK_* values
> + * @parents: an index of parent of this clock
> + * within the clock_info array, or -1
> + * which correspond to no valid parent
> + * @pll: information valid if type includes ATH79_CLK_PLL
> + */
> +struct ath79_clk_info {
> + const char *name;
> +
> + enum {
> + ATH79_CLK_NONE = 0,
> + ATH79_CLK_EXT = 1,
> + ATH79_CLK_PLL = 2,
> + ATH79_CLK_ALIAS = 3,
> + } type;
> +
> + struct ath79_cblk *cblk;
> + int parent;
> +
> + struct ath79_pll_info pll;
> +};
> +
> +struct ath79_cblk {
> + struct device_node *np;
> + void __iomem *base;
> +
> + const struct ath79_clk_info *clock_info;
> + struct clk_onecell_data clocks;
> +};
> +
> +/**
> + * struct ath79_clk - private data for a clock
> + * @hw: see Documentation/clk.txt
> + * @cblk: a pointer to the cblk data
> + * @idx: the index of this clock cblk->clock_info
> + * @pll: information valid if type includes ATH79_CLK_PLL
> + */
> +struct ath79_clk {
> + struct clk_hw hw;
> + struct ath79_cblk *cblk;
> + unsigned idx;
> +};
> +
> +#define to_ath79_clk(_hw) container_of(_hw, struct ath79_clk, hw)
> +
> +static const struct ath79_clk_info ar9331_clocks[] = {
> +
> + /* External clock */
> + [ATH79_CLK_REF] = { "ref", ATH79_CLK_EXT },
> +
> + [ATH79_CLK_CPU] = {
> + "cpu", ATH79_CLK_PLL,
> + .parent = ATH79_CLK_REF,
> + .pll = {
> + .div_shift = AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT,
> + .div_mask = AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK,
> + },
> + },
> +
> + [ATH79_CLK_DDR] = {
> + "ddr", ATH79_CLK_PLL,
> + .parent = ATH79_CLK_REF,
> + .pll = {
> + .div_shift = AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT,
> + .div_mask = AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK,
> + },
> + },
> +
> + [ATH79_CLK_AHB] = {
> + "ahb", ATH79_CLK_PLL,
> + .parent = ATH79_CLK_REF,
> + .pll = {
> + .div_shift = AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT,
> + .div_mask = AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK,
> + },
> + },
> +
> + [ATH79_CLK_WDT] = {
> + "wdt", ATH79_CLK_ALIAS,
> + .parent = ATH79_CLK_AHB,
> + },
> +
> + [ATH79_CLK_UART] = {
> + "uart", ATH79_CLK_ALIAS,
> + .parent = ATH79_CLK_REF,
> + },
> +};
> +
> +struct ath79_cblk *
> +ath79_cblk_new(const struct ath79_clk_info *clock_info,
> + unsigned num_clocks, struct device_node *np)
> +{
> + struct ath79_cblk *cblk;
> +
> + cblk = kzalloc(sizeof(*cblk), GFP_KERNEL);
> + if (!cblk)
> + goto err_out;
> +
> + cblk->base = of_iomap(np, 0);
> + if (!cblk->base) {
> + pr_err("%s: failed to map clock block registers\n", __func__);
> + goto err_out_free;
> + }
> +
> + cblk->np = np;
> + cblk->clock_info = clock_info;
> + cblk->clocks.clk_num = num_clocks;
> +
> + return cblk;
> +
> +err_out_free:
> + kfree(cblk);
> +
> +err_out:
> + return NULL;
> +}
> +
> +static unsigned long
> +ath79_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + struct ath79_clk *ath79_clk = to_ath79_clk(hw);
> + struct ath79_cblk *cblk = ath79_clk->cblk;
> + const struct ath79_clk_info *clk_info = &cblk->clock_info[ath79_clk->idx];
> + const struct ath79_pll_info *pll_info;
> + unsigned long rate;
> + unsigned long freq;
> + u32 clock_ctrl;
> + u32 cpu_config;
> + u32 t;
> +
> + BUG_ON(clk_info->type != ATH79_CLK_PLL);
It's probably debatable if such a BUG_ON() is really needed.
> + clock_ctrl = __raw_readl(cblk->base + AR933X_PLL_CLOCK_CTRL_REG);
> +
> + if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
> + return parent_rate;
> + }
Those brace should goes away.
> + cpu_config = __raw_readl(cblk->base + AR933X_PLL_CPU_CONFIG_REG);
> +
> + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
> + AR933X_PLL_CPU_CONFIG_REFDIV_MASK;
> + freq = parent_rate / t;
> +
> + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_NINT_SHIFT) &
> + AR933X_PLL_CPU_CONFIG_NINT_MASK;
> + freq *= t;
> +
> + t = (cpu_config >> AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
> + AR933X_PLL_CPU_CONFIG_OUTDIV_MASK;
> + if (t == 0)
> + t = 1;
> +
> + freq >>= t;
> +
> + pll_info = &clk_info->pll;
> +
> + t = ((clock_ctrl >> pll_info->div_shift) & pll_info->div_mask) + 1;
> + rate = freq / t;
If we just compute a fixed rate we could as well use
clk_register_fixed_factor() and drop 80% of the code of this driver.
> + return rate;
> +}
> +
> +static const struct clk_ops ath79_pll_clk_ops = {
> + .recalc_rate = ath79_pll_recalc_rate,
> +};
> +
> +static int ath79_register_clock(struct ath79_cblk *cblk, unsigned idx)
> +{
> + const struct ath79_clk_info *clk_info = &cblk->clock_info[idx];
> + const struct ath79_clk_info *parent_clk_info;
> + struct clk_init_data clk_init;
> + struct ath79_clk *ath79_clk = NULL;
> + struct clk *clk;
> + int err = -EINVAL;
> +
> + if (clk_info->type == ATH79_CLK_EXT) {
> + clk = of_clk_get_by_name(cblk->np, clk_info->name);
> + if (IS_ERR(clk)) {
> + pr_err("%s: no external clock '%s' provided\n",
> + __func__, clk_info->name);
> + err = -ENODEV;
> + goto out;
> + }
> +
> + err = clk_register_clkdev(clk, clk_info->name, NULL);
> + if (err) {
> + clk_put(clk);
> + goto out;
> + }
clk_register_clkdev() and naming providers is not needed on OF
platforms. This should only be used on legacy platforms.
> + cblk->clocks.clks[idx] = clk;
> +
> + return 0;
> + }
> +
> + parent_clk_info = &cblk->clock_info[clk_info->parent];
> +
> + if (clk_info->type == ATH79_CLK_ALIAS) {
> + clk = clk_register_fixed_factor(NULL, clk_info->name,
> + parent_clk_info->name, 0, 1, 1);
> + if (IS_ERR(clk)) {
> + pr_err("%s: failed to register clock '%s'\n", __func__,
> + clk_info->name);
> + err = PTR_ERR(clk);
> + goto out;
> + }
> +
> + cblk->clocks.clks[idx] = clk;
> +
> + return 0;
> + }
I really don't get why you keep insisting on having those useless alias
clocks. Alias are only needed on legacy platforms to form connections
between clock providers and consumers. On OF platforms these
connections are nicely represented in the DT, so it is just not
needed at all.
> + if (!clk_info->type) {
> + pr_err("%s: no clock type specified for '%s'\n", __func__,
> + clk_info->name);
> + goto out;
> + }
> +
> + ath79_clk = kzalloc(sizeof(*ath79_clk), GFP_KERNEL);
> + if (!ath79_clk) {
> + err = -ENOMEM;
> + goto out;
> + }
> +
> + ath79_clk->hw.init = &clk_init;
> + ath79_clk->cblk = cblk;
> + ath79_clk->idx = idx;
> +
> + clk_init.name = clk_info->name;
> + clk_init.flags = 0;
> + clk_init.parent_names = &parent_clk_info->name;
> + clk_init.num_parents = 1;
> +
> + if (clk_info->type == ATH79_CLK_PLL) {
> + clk_init.ops = &ath79_pll_clk_ops;
> + }
> +
> + clk = clk_register(NULL, &ath79_clk->hw);
> + if (IS_ERR(clk)) {
> + pr_err("%s: failed to register clock '%s'\n", __func__,
> + clk_info->name);
> + err = PTR_ERR(clk);
> + goto out;
> + }
> +
> + err = clk_register_clkdev(clk, clk_info->name, NULL);
> + if (err)
> + goto out;
clk_register_clkdev() shouldn't be needed here either.
> + cblk->clocks.clks[idx] = clk;
> +out:
> + if (err)
> + kfree(ath79_clk);
> +
> + return err;
> +}
> +
> +static int ath79_cblk_register_clocks(struct ath79_cblk *cblk)
> +{
> + unsigned i;
> + int err;
> +
> + cblk->clocks.clks = kcalloc(cblk->clocks.clk_num, sizeof(struct clk *),
> + GFP_KERNEL);
> + if (!cblk->clocks.clks) {
> + err = -ENOMEM;
> + goto err_out;
> + }
> +
> + for (i = 0; i < cblk->clocks.clk_num; i++) {
> + err = ath79_register_clock(cblk, i);
> + if (err)
> + goto err_out_unregister;
> + }
> +
> + err = of_clk_add_provider(cblk->np, of_clk_src_onecell_get,
> + &cblk->clocks);
> + if (err)
> + goto err_out_unregister;
> +
> + return 0;
> +
> +err_out_unregister:
> + for (i = 0; i < cblk->clocks.clk_num; i++) {
> + if (!cblk->clocks.clks[i])
> + continue;
> + if (cblk->clock_info[i].type == ATH79_CLK_EXT)
> + clk_put(cblk->clocks.clks[i]);
> + else
> + clk_unregister(cblk->clocks.clks[i]);
> + }
> +
> + kfree(cblk->clocks.clks);
> +
> +err_out:
> + return err;
> +}
> +
> +static void __init ar9130_init(struct device_node *np)
> +{
> + int retval;
> + struct ath79_cblk *cblk;
> +
> + cblk = ath79_cblk_new(ar9331_clocks, ARRAY_SIZE(ar9331_clocks), np);
> + if (!cblk) {
> + pr_err("%s: failed to initialise clk block\n", __func__);
> + return;
> + }
> +
> + retval = ath79_cblk_register_clocks(cblk);
> + if (retval)
> + pr_err("%s: failed to register clocks\n", __func__);
> +}
> +CLK_OF_DECLARE(ar933x_clk, "qca,ar9330-pll", ar9130_init);
> diff --git a/include/dt-bindings/clock/ath79-clk.h b/include/dt-bindings/clock/ath79-clk.h
> new file mode 100644
> index 0000000..1c6fb04
> --- /dev/null
> +++ b/include/dt-bindings/clock/ath79-clk.h
> @@ -0,0 +1,22 @@
> +/*
> + * Copyright (C) 2014, 2016 Antony Pavlov <antonynpavlov@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#ifndef __DT_BINDINGS_ATH79_CLK_H
> +#define __DT_BINDINGS_ATH79_CLK_H
> +
> +#define ATH79_CLK_REF 0
> +#define ATH79_CLK_CPU 1
> +#define ATH79_CLK_DDR 2
> +#define ATH79_CLK_AHB 3
> +#define ATH79_CLK_WDT 4
> +#define ATH79_CLK_UART 5
> +
> +#define ATH79_CLK_END 6
> +
> +#endif /* __DT_BINDINGS_ATH79_CLK_H */
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
