Keyboard driver for GPIO buttons(gpio-keys) checks for the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source. Few dts files assign value "1" to gpio-key,wakeup which is incorrect. Since the presence of the boolean property indicates it is enabled, value of "0" or "1" have no significance. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property which inturn fixes the above mentioned issue. Reviewed-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx> Signed-off-by: Sudeep Holla <sudeep.holla@xxxxxxx> --- arch/arm/boot/dts/spear1310-evb.dts | 2 +- arch/arm/boot/dts/spear1340-evb.dts | 2 +- arch/arm/boot/dts/spear320-hmi.dts | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) (this time adding arm@xxxxxxxxxx correctly) Hi ARM-SoC guys, This is the only platform which doesn't have regular pull request, Viresh has acked it already. Can you pick this up directly for v4.6 ? Regards, Sudeep diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index e48857249ce7..84101e4eebbf 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -161,7 +161,7 @@ linux,code = <0x100>; gpios = <&gpio0 7 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index c611f5606dfe..6565f3cb866f 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -223,7 +223,7 @@ linux,code = <0x100>; gpios = <&gpio1 1 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 0aa6fef5ce22..0d0da1f65f0e 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -141,7 +141,7 @@ linux,code = <0x100>; gpios = <&stmpegpio 3 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; button@2 { @@ -149,7 +149,7 @@ linux,code = <0x200>; gpios = <&stmpegpio 2 0x4>; debounce-interval = <20>; - gpio-key,wakeup = <1>; + wakeup-source; }; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html