Re: [PATCH v3 03/10] Input: synaptics-rmi4: Add device tree support for RMI4 I2C devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Feb 02, 2016 at 05:44:17PM -0800, Andrew Duggan wrote:
> Add devicetree binding for I2C devices and add bindings for optional
> parameters in the function drivers. Parameters for function drivers are
> defined in child nodes for each of the functions.
> 
> Signed-off-by: Andrew Duggan <aduggan@xxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/input/rmi4/rmi_f01.txt     | 39 ++++++++++++++++
>  .../devicetree/bindings/input/rmi4/rmi_i2c.txt     | 53 ++++++++++++++++++++++
>  .../devicetree/bindings/vendor-prefixes.txt        |  1 +
>  drivers/input/rmi4/rmi_bus.c                       | 35 ++++++++++++++
>  drivers/input/rmi4/rmi_bus.h                       |  4 --
>  drivers/input/rmi4/rmi_driver.c                    | 28 ++++++++++++
>  drivers/input/rmi4/rmi_f01.c                       | 50 ++++++++++++++++++++
>  drivers/input/rmi4/rmi_i2c.c                       | 12 ++++-
>  8 files changed, 217 insertions(+), 5 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
>  create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
> 
> diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
> new file mode 100644
> index 0000000..096855c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
> @@ -0,0 +1,39 @@
> +Synaptics RMI4 F01 Device Binding
> +
> +The Synaptics RMI4 core is able to support RMI4 devices using different
> +transports and different functions. This file describes the device tree
> +bindings for devices which contain Function 1. Complete documentation
> +for transports and other functions can be found in:
> +Documentation/devicetree/bindings/input/rmi4.
> +
> +Additional documentation for F01 can be found at:
> +http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
> +
> +Optional Properties:
> +- syna,nosleep-mode: If set the device will run at full power without sleeping.
> +			nosleep has 3 modes, 0 will not change the default
> +			setting, 1 will disable nosleep (allow sleeping),
> +			and 2 will enable nosleep (disabling sleep).
> +- syna,wakeup-threshold: Defines the amplitude of the disturbance to the
> +				background capacitance that will cause the
> +				device to wake from dozing.
> +- syna,doze-holdoff-msec: The delay to wait after the last finger lift and the
> +				first doze cycle.
> +- syna,doze-interval-msec: The time period that the device sleeps between finger
> +				activity.

Sorry, but I told you the wrong suffix. It should be just '-ms'.

I've finally done my TODO list item of documenting what suffixes to use.

Otherwise, for the bindings:

Acked-by: Rob Herring <robh@xxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux